Fatigue study of partially overlapped circular hollow section K-joints. Part 2 : experimental study and validation of numerical models

Fatigue study of partially overlapped circular hollow section K-joints. Part 2 : experimental study and validation of numerical models

In the second part of this study, the reliability of the geometrical models and the mesh generation procedure developed in Part 1 are validated by comparing the modelling results with full scale tests results. Static tests were applied to study the stress concentration factors while fatigue tests we...

Saved in:

書目詳細資料
Main Authors:	Chiew, Sing Ping, Lee, Chi King, Lie, Seng Tjhen, Nguyen, T. B. N.
其他作者:	School of Civil and Environmental Engineering
格式:	Article
語言:	English
出版:	2014
主題:	DRNTU::Engineering::Civil engineering::Structures and design
在線閱讀:	https://hdl.handle.net/10356/103123 http://hdl.handle.net/10220/19174
標簽:	添加標簽沒有標簽, 成為第一個標記此記錄!
機構:	Nanyang Technological University
語言:	English

相似書籍

Fatigue study of partially overlapped circular hollow section K-joints. Part 1 : geometrical models and mesh generation
由: Lee, Chi King, et al.
出版: (2014)

Comparison of fatigue performances of gapped and partially overlapped CHS K-joints
由: Sopha, T., et al.
出版: (2014)

Model and mesh generation of partially overlapped circular hollow section k-joints for fatigue studies
由: Nguyen, Thi Bich Ngoc
出版: (2010)

Fatigue behaviors of square-to-square hollow section T-joint with corner crack II : numerical modeling
由: Lee, Chi King, et al.
出版: (2014)

Fatigue strength of circular and rectangular hollow sections subjected to complex loading conditions
由: Lie, Seng Tjhen.
出版: (2009)

Fatigue behaviors of square-to-square hollow section T-joint with corner crack I : experimental studies
由: Chiew, Sing Ping, et al.
出版: (2014)

Stress concentration factor and hot spot stress studies of partially overlapped circular hollow section K-joints
由: Thong, Sopha
出版: (2010)

Fracture and Failure Assessment of Fatigue-Cracked Circular Hollow Section X-Joints
由: OU ZHIYONG
出版: (2013)

Numerical study of Circular Hollow Section (CHS) Y-joints in fire
由: Zou, Yuxing.
出版: (2013)

Plastic collapse load prediction of cracked circular hollow section T/Y-joints under in-plane and out-of-plane bending
由: Li, Tao, et al.
出版: (2019)

Plastic collapse loads Pc and CTODs of a cracked Circular Hollow Section (CHS) T-joint
由: Li, T., et al.
出版: (2013)

Joints between plates or I sections and a circular hollow section chord
由: Wardenier, J., et al.
出版: (2016)

Joints between plates or I sections and a circular hollow section chord
由: Wardenier, J., et al.
出版: (2016)

Strength of overlap square hollow section K-joints based on chord face failure
由: Thong, Sopha.
出版: (2008)

Axially loaded Elliptical Hollow Section X joints, Part I: Experiments and numerical calibration
由: Shen, W., et al.
出版: (2014)

Numerical models verification of cracked tubular T, Y and K-joints under combined loads
由: Lee, Chi King, et al.
出版: (2014)

Fatigue behaviour of square-to-square hollow section T-joints with corner cracks
由: Ji, Hongli
出版: (2010)

Structural behaviours of circular hollow section T-joints subjected to elevated temperature
由: Nguyen, Minh Phuong.
出版: (2013)

Failure assessment diagrams for circular hollow section X- and K-joints
由: Qian, X.
出版: (2014)

New reduction factor for cracked multi-planar square hollow section TT-, YT- and KT-joints
由: Lie, Seng Tjhen, et al.
出版: (2017)

Mode mixity for circular hollow section X joints with weld toe cracks
由: Qian, X., et al.
出版: (2014)

Simulation of ductile fracture of circular hollow section joints using the Gurson model
由: Qian, X.D., et al.
出版: (2014)

Residual stress of high strength steel box T-joints Part 2 : numerical study
由: Chiew, Sing Ping, et al.
出版: (2014)

Monitoring fatigue crack growth in welded joints using alternating current potential drop (ACPD) technique
由: Lie, Seng Tjhen.
出版: (2008)

An optimal design tool for welded circular hollow section joint using MS-Excel
由: Lim, Ban Khin.
出版: (2011)

Parametric study of doubler plate reinforced circular hollow section T-joints at elevated temperature
由: Foo, Bo Lim
出版: (2015)

Parametric study of doubler plate reinforced circular hollow section T : joints at elevated temperature
由: Zulfadli Mat Noor
出版: (2015)

Quick design tool for welded circular hollow sections joint using MS Excel
由: Law, Xiao Han.
出版: (2009)

Structural behaviour of completely overlap tubular joints
由: Soh, Chee Kiong., et al.
出版: (2008)

Stress-intensity factors for circular hollow section V-joints with a rack-plate chord
由: Qian, X.
出版: (2014)

Ultimate strength of doubler plate reinforced circular hollow section (CHS) T-joint under elevated temperatures
由: Zhong, Ai
出版: (2014)

Failure assessment of a cracked circular hollow section T-joint including the effect of crack-front constraints
由: Qian, X., et al.
出版: (2014)

Failure assessment of cracked uni-planar square hollow section T-, Y- and K-joints using the new BS 7910:2013+A1:2015
由: Kolios, Athanasios, et al.
出版: (2019)

Fatigue performance of high strength steel built-up box t-joints
由: Chiew, Sing Ping, et al.
出版: (2015)

Axially loaded Elliptical Hollow Section X joints, Part II: Results and analysis
由: Shen, W., et al.
出版: (2014)

Residual stress study of welded high strength steel thin-walled plate-to-plate joints, part 2 : numerical modeling
由: Chiew, Sing Ping, et al.
出版: (2014)

Fatigue performance of enhanced partial joint penetration welds for tubular joints
由: Marshall, P., et al.
出版: (2014)

EXTENSION OF η METHOD TO MEASURE CRACK DRIVING FORCE OF SURFACE-CRACKED CIRCULAR HOLLOW SECTION X-JOINT
由: ZHAN LINYUAN
出版: (2019)

Proposed corrections for en 1993-1-8, Part & quot;Hollow Section Joints & quot;
由: Wardenier, J., et al.
出版: (2016)

Numerical study of circle hollow section (CHS) Y-joints in fire (ST-25AB)
由: Deng, Yue
出版: (2013)