Model and mesh generation of cracked tubular Y-joints

• المؤلفون الرئيسيون: Lie, Seng Tjhen, Lee, Chi King, Wong, S. M.
• مؤلفون آخرون: School of Civil and Environmental Engineering
• التنسيق: مقال
• اللغة: English
• منشور في: 2014
• الموضوعات: DRNTU::Engineering::Civil engineering::Structures and design
• الوصول للمادة أونلاين: https://hdl.handle.net/10356/103286; http://hdl.handle.net/10220/19240

In this study, the methods for constructing accurate and consistent geometrical and finite element models for general cracked tubular Y-joints are described. Firstly, geometrical analysis of welded tubular joint is given and it is then extended to the modelling of general cracked Y-joints. The concept of crack surface and a simple mapping approach are suggested to model either through-thickness or surface cracks which can be of any length and located at any position along the brace-chord intersection. Secondly, the geometrical model developed will be used in the generation of consistent finite element meshes. The basic concepts used for the design and generation of 3D finite element meshes will be described. This will include the meshing procedures for discretization of tubular joints with through-thickness and surface cracks which are frequently regarded as one of the most difficult steps in the construction of tubular joint models. Finally, some mesh generation examples for uncracked and cracked Yjoints will be presented to demonstrate the use of the purposed geometrical model and mesh generation scheme developed.