A 180 nm technology new 2.5 Gbps burst-mode optical receiver design with automatic gain control and feed-forward created reset
A 180 nm technology new 2.5 Gbps burst-mode optical receiver design with automatic gain control and feed-forward created reset for Ethernet Passive Optical Network (EPON) Systems is presented. To achieve fast response, a reset signal is internally created in the circuit in a feed-forward configurati...
Saved in:
Main Authors: | , , |
---|---|
Other Authors: | |
Format: | Article |
Language: | English |
Published: |
2015
|
Subjects: | |
Online Access: | https://hdl.handle.net/10356/103945 http://hdl.handle.net/10220/24644 |
Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
Institution: | Nanyang Technological University |
Language: | English |
id |
sg-ntu-dr.10356-103945 |
---|---|
record_format |
dspace |
spelling |
sg-ntu-dr.10356-1039452020-03-07T14:00:34Z A 180 nm technology new 2.5 Gbps burst-mode optical receiver design with automatic gain control and feed-forward created reset Siek, Liter Duan, Lian Lim, Wei Meng School of Electrical and Electronic Engineering DRNTU::Engineering::Electrical and electronic engineering::Optics, optoelectronics, photonics A 180 nm technology new 2.5 Gbps burst-mode optical receiver design with automatic gain control and feed-forward created reset for Ethernet Passive Optical Network (EPON) Systems is presented. To achieve fast response, a reset signal is internally created in the circuit in a feed-forward configuration. In additional, an Automatic Gain Control block is included in the circuit to improve the dynamic range of the optical receiver. Fabricated in a 180 nm CMOS technology, the optical receiver demonstrates a fast response time of less than 10 ns inclusive of the reset creation time. The measured input referred noise is less than 0.97 μArms corresponding to a sensitivity current of 6.79 μArms. A single-ended output reaches a 300 mV swing with input current ranging from 25 μA p–p to 1600 μA p–p . The chip consumes 189 mW from a 1.8 V power supply occupying an area of 1400 μm × 550 μm. 2015-01-16T01:43:50Z 2019-12-06T21:23:27Z 2015-01-16T01:43:50Z 2019-12-06T21:23:27Z 2014 2014 Journal Article Siek, L., Duan, L., & Lim, W. M. (2014). A 180 nm technology new 2.5 Gbps burst-mode optical receiver design with automatic gain control and feed-forward created reset. Nanoscience and nanotechnology letters, 6(9), 817-824. https://hdl.handle.net/10356/103945 http://hdl.handle.net/10220/24644 10.1166/nnl.2014.1846 en Nanoscience and nanotechnology letters © 2014 American Scientific Publishers. |
institution |
Nanyang Technological University |
building |
NTU Library |
country |
Singapore |
collection |
DR-NTU |
language |
English |
topic |
DRNTU::Engineering::Electrical and electronic engineering::Optics, optoelectronics, photonics |
spellingShingle |
DRNTU::Engineering::Electrical and electronic engineering::Optics, optoelectronics, photonics Siek, Liter Duan, Lian Lim, Wei Meng A 180 nm technology new 2.5 Gbps burst-mode optical receiver design with automatic gain control and feed-forward created reset |
description |
A 180 nm technology new 2.5 Gbps burst-mode optical receiver design with automatic gain control and feed-forward created reset for Ethernet Passive Optical Network (EPON) Systems is presented. To achieve fast response, a reset signal is internally created in the circuit in a feed-forward configuration. In additional, an Automatic Gain Control block is included in the circuit to improve the dynamic range of the optical receiver. Fabricated in a 180 nm CMOS technology, the optical receiver demonstrates a fast response time of less than 10 ns inclusive of the reset creation time. The measured input referred noise is less than 0.97 μArms corresponding to a sensitivity current of 6.79 μArms. A single-ended output reaches a 300 mV swing with input current ranging from 25 μA p–p to 1600 μA p–p . The chip consumes 189 mW from a 1.8 V power supply occupying an area of 1400 μm × 550 μm. |
author2 |
School of Electrical and Electronic Engineering |
author_facet |
School of Electrical and Electronic Engineering Siek, Liter Duan, Lian Lim, Wei Meng |
format |
Article |
author |
Siek, Liter Duan, Lian Lim, Wei Meng |
author_sort |
Siek, Liter |
title |
A 180 nm technology new 2.5 Gbps burst-mode optical receiver design with automatic gain control and feed-forward created reset |
title_short |
A 180 nm technology new 2.5 Gbps burst-mode optical receiver design with automatic gain control and feed-forward created reset |
title_full |
A 180 nm technology new 2.5 Gbps burst-mode optical receiver design with automatic gain control and feed-forward created reset |
title_fullStr |
A 180 nm technology new 2.5 Gbps burst-mode optical receiver design with automatic gain control and feed-forward created reset |
title_full_unstemmed |
A 180 nm technology new 2.5 Gbps burst-mode optical receiver design with automatic gain control and feed-forward created reset |
title_sort |
180 nm technology new 2.5 gbps burst-mode optical receiver design with automatic gain control and feed-forward created reset |
publishDate |
2015 |
url |
https://hdl.handle.net/10356/103945 http://hdl.handle.net/10220/24644 |
_version_ |
1681047862205480960 |