Polymer microlasers with a suspended cavity design
We report on the fabrication of microlasers with suspended cavity design in a thin layer of Rhodamine B doped SU-8 polymer using proton beam writing. Optical characterization of the fabricated three-dimensional microlasers under ambient atmosphere results in low lasing threshold of 0.5 μJ/mm2, which...
Saved in:
| Main Authors: | , , |
|---|---|
| Other Authors: | |
| Format: | Article |
| Language: | English |
| Published: |
2015
|
| Subjects: | |
| Online Access: | https://hdl.handle.net/10356/106223 http://hdl.handle.net/10220/24719 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Institution: | Nanyang Technological University |
| Language: | English |
| Summary: | We report on the fabrication of microlasers with suspended cavity design in a thin layer of Rhodamine B doped SU-8 polymer using proton beam writing. Optical characterization of the fabricated three-dimensional microlasers under ambient atmosphere results in low lasing threshold of 0.5 μJ/mm2, which is an improvement by factor of 2 when compared to planar microlasers. The directional behavior is also observed in whispering gallery mode microlasers with spiral cavity design. These microlasers with suspended cavity design are not only useful in reducing the lasing threshold but also have significance in 3D photonic integrated circuits. |
|---|