Turbulent flow over a rough backward-facing step
This work characterizes the impacts of the realistic roughness due to deposition of foreign materials on the turbulent flows at surface transition from elevated rough-wall to smooth-wall. High resolution PIV measurements were performed in the streamwise-wall-normal (x–y) planes at two different span...
Saved in:
Main Authors: | , , |
---|---|
Other Authors: | |
Format: | Article |
Language: | English |
Published: |
2013
|
Subjects: | |
Online Access: | https://hdl.handle.net/10356/106331 http://hdl.handle.net/10220/17954 http://dx.doi.org/10.1016/j.ijheatfluidflow.2013.05.014 |
Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
Institution: | Nanyang Technological University |
Language: | English |
id |
sg-ntu-dr.10356-106331 |
---|---|
record_format |
dspace |
spelling |
sg-ntu-dr.10356-1063312019-12-06T22:09:17Z Turbulent flow over a rough backward-facing step Wu, Yanhua. Ren, Huiying. Tang, Hui. School of Mechanical and Aerospace Engineering DRNTU::Engineering::Mechanical engineering This work characterizes the impacts of the realistic roughness due to deposition of foreign materials on the turbulent flows at surface transition from elevated rough-wall to smooth-wall. High resolution PIV measurements were performed in the streamwise-wall-normal (x–y) planes at two different spanwise positions in both smooth and rough backward-facing step flows. The experiment conditions were set at a Reynolds number of 3450 based on the free stream velocity U∞ and the mean step height h, expansion ratio of 1.01, and the ratio of incoming boundary layer thickness to the step height, δ/h, of 8. The mean flow structures are observed to be modified by the roughness and they illustrate three-dimensional features in rough backward-facing step flows. The mean reattachment length Xr is significantly reduced by the roughness at one PIV measurement position while is slightly increased by the different roughness topography at the other measurement position. The mean velocity profiles at the reattachment point indicate that the studied roughness weakens the perturbation of the step to the incoming turbulent flow. Comparisons of Reynolds normal and shear stresses, productions of normal stresses, quadrant analysis of the instantaneous shear-stress contributing events, and mean spanwise vorticity reveal that the turbulence in the separated shear layer is reduced by the studied roughness. The results also indicate an earlier separation of the turbulent boundary layer over the current rough step, probably due to the adverse pressure gradient produced by the roughness topography even before the step. 2013-11-29T07:22:06Z 2019-12-06T22:09:17Z 2013-11-29T07:22:06Z 2019-12-06T22:09:17Z 2013 2013 Journal Article Wu, Y., Ren, H., & Tang, H. (2013). Turbulent flow over a rough backward-facing step. International journal of heat and fluid flow, in press. 0142-727X https://hdl.handle.net/10356/106331 http://hdl.handle.net/10220/17954 http://dx.doi.org/10.1016/j.ijheatfluidflow.2013.05.014 en International journal of heat and fluid flow |
institution |
Nanyang Technological University |
building |
NTU Library |
country |
Singapore |
collection |
DR-NTU |
language |
English |
topic |
DRNTU::Engineering::Mechanical engineering |
spellingShingle |
DRNTU::Engineering::Mechanical engineering Wu, Yanhua. Ren, Huiying. Tang, Hui. Turbulent flow over a rough backward-facing step |
description |
This work characterizes the impacts of the realistic roughness due to deposition of foreign materials on the turbulent flows at surface transition from elevated rough-wall to smooth-wall. High resolution PIV measurements were performed in the streamwise-wall-normal (x–y) planes at two different spanwise positions in both smooth and rough backward-facing step flows. The experiment conditions were set at a Reynolds number of 3450 based on the free stream velocity U∞ and the mean step height h, expansion ratio of 1.01, and the ratio of incoming boundary layer thickness to the step height, δ/h, of 8. The mean flow structures are observed to be modified by the roughness and they illustrate three-dimensional features in rough backward-facing step flows. The mean reattachment length Xr is significantly reduced by the roughness at one PIV measurement position while is slightly increased by the different roughness topography at the other measurement position. The mean velocity profiles at the reattachment point indicate that the studied roughness weakens the perturbation of the step to the incoming turbulent flow. Comparisons of Reynolds normal and shear stresses, productions of normal stresses, quadrant analysis of the instantaneous shear-stress contributing events, and mean spanwise vorticity reveal that the turbulence in the separated shear layer is reduced by the studied roughness. The results also indicate an earlier separation of the turbulent boundary layer over the current rough step, probably due to the adverse pressure gradient produced by the roughness topography even before the step. |
author2 |
School of Mechanical and Aerospace Engineering |
author_facet |
School of Mechanical and Aerospace Engineering Wu, Yanhua. Ren, Huiying. Tang, Hui. |
format |
Article |
author |
Wu, Yanhua. Ren, Huiying. Tang, Hui. |
author_sort |
Wu, Yanhua. |
title |
Turbulent flow over a rough backward-facing step |
title_short |
Turbulent flow over a rough backward-facing step |
title_full |
Turbulent flow over a rough backward-facing step |
title_fullStr |
Turbulent flow over a rough backward-facing step |
title_full_unstemmed |
Turbulent flow over a rough backward-facing step |
title_sort |
turbulent flow over a rough backward-facing step |
publishDate |
2013 |
url |
https://hdl.handle.net/10356/106331 http://hdl.handle.net/10220/17954 http://dx.doi.org/10.1016/j.ijheatfluidflow.2013.05.014 |
_version_ |
1681044865288241152 |