Design, development and evaluation of nanofibrous composite membranes with opposing membrane wetting properties for extractive membrane bioreactors

• Main Authors: Liao, Yuan, Goh, Shuwen, Tian, Miao, Wang, Rong, Fane, Anthony G.
• Other Authors: School of Civil and Environmental Engineering
• Format: Article
• Language: English
• Published: 2020
• Subjects: Engineering::Civil engineering; Superhydrophobic; Superhydrophilic
• Online Access: https://hdl.handle.net/10356/136797
• Institution: Nanyang Technological University

Extractive membrane bioreactors (EMBRs) are promising wastewater treatment processes combining an aqueous-aqueous extractive membrane process and biodegradation. The target contaminants diffuse through an extractive membrane and are metabolized by the active biofilm attached on the downstream membrane surface and microorganisms in the bioreactor. The benefit of EMBRs is that the biomass is not exposed to the potentially hostile feed conditions (high salinity, pH extremes etc.). The physicochemical properties of membrane surfaces on the receiving side facing the bioreactor are critical in controlling the extent and nature of the membrane-attached biofilm. In this work, novel nanofibrous composite membranes with a superhydrophobic surface (coded as NC) or a superhydrophilic surface (coded as M-NC) on the receiving side have been designed, developed and evaluated in EMBRs. Compared to commercial polydimethysiloxane (PDMS) tubular membranes, both NC and M-NC possessed 10 times higher phenol extraction efficiency in an aqueous-aqueous extractive membrane process. The uncontrolled biofilm growth on the membrane surface after 12 days of cross flow EMBR (CF-EMBR) operation resulted in 62% reductions of overall mass transfer coefficients (k0) of both NC and M-NC. However, both membranes exhibited better performance in a submerged EMBR (S-EMBR) configuration due to the presence of air bubbles scouring on the membrane surface. Moreover, the fouling-releasing fluoro-polymeric surface of the hydrophobic NC was able to attenuate the tendency of microbial attachment and encourage biofilm scouring from the membrane surface in the S-EMBR. In contrast, more polysaccharides were present in the biofilm on the poly (ethylene glycol) (PEG)-modified M-NC surface, which acted as adhesives to tightly immobilize the biofilm on the membrane surface. Lastly, the NC which exhibited a higher stable k0 of 5.7 × 10−7 m/s in 12 days of S-EMBR operation, has been tested in a pilot S-EMBR to treat actual industrial wastewater. It showed a stable and competitive k0 of 6.5 × 10−7 m/s in 31 days operation, demonstrating its feasibility for hostile industrial wastewater treatment.