Controlled hydrodynamic cavitation erosion with abrasive particles for internal surface modification of additive manufactured components

• Main Authors: Nagalingam, Arun Prasanth, Yeo, Swee Hock
• Other Authors: School of Mechanical and Aerospace Engineering
• Format: Article
• Language: English
• Published: 2020
• Subjects: Engineering::Mechanical engineering; Internal Surface Modification; Hydrodynamic Cavitation
• Online Access: https://hdl.handle.net/10356/136947
• Institution: Nanyang Technological University

The understanding and control of wear process can result in advances in manufacturing science. For example, Surface finishing the internal surfaces of a component built using Additive Manufacturing (AM) technique that consists of random roughness distribution throughout its surface is a key problem. This paper describes an innovative approach of using hydrodynamic flow at its cavitating conditions along with freely suspended abrasive particles for finishing the internal surfaces of additive manufactured components. Experiments are conducted on cylindrical as-built aluminium alloy AlSi10Mg parts manufactured using Direct Metal Laser Sintering (DMLS) technique. Application of controlled cavitation erosion by fluids containing entrained SiC particles resulted in a 40% reduction in the average surface roughness (Sa) on the internal surface of a cylindrical specimen. Scanning electron microscope (SEM) observations showed erosion due to hydrodynamic cavitation removed most of the surface irregularities such as loosely attached and/or partially melted powders. Furthermore, direct abrasion after the addition of micro-abrasive media into the cavitating flow deformed as well as partially removed the larger-sized irregularities and resulted in smoother surfaces.