Laser power based surface characteristics models for 3-D printing process

Laser power based surface characteristics models for 3-D printing process

Selective laser melting (SLM) is one of the important 3-D Printing processes that builds components of complex 3D shapes directly from the metal powder. It is widely used in manufacturing industries and is operated on significant amount of laser power drawn from the electric grid. The literature rev...

Saved in:

書目詳細資料
Main Authors:	Garg, Akhil, Lam, Jasmine Siu Lee, Savalani, Monica Mahesh
其他作者:	School of Civil and Environmental Engineering
格式:	Article
語言:	English
出版:	2020
主題:	Engineering::Environmental engineering Selective Laser Melting Laser Power
在線閱讀:	https://hdl.handle.net/10356/139438
標簽:	添加標簽沒有標簽, 成為第一個標記此記錄!
機構:	Nanyang Technological University
語言:	English

相似書籍

Initial Study of Selective Laser Melting of ZrO2/Al2O3 Ceramic
由: Zhao, Ziqiang, et al.
出版: (2016)

The Effect Of Laser Power And Scanning Speed On The Density Of Selective Laser Melting Fabricated AL-CNT Composites
由: Du, Zhenglin, et al.
出版: (2016)

Influence of re-melting on surface roughness and porosity of AlSi10Mg parts fabricated by selective laser melting
由: Yu, Wenhui, et al.
出版: (2020)

Simultaneously enhanced strength and ductility for 3D-printed stainless steel 316L by selective laser melting
由: Sun, Zhongji, et al.
出版: (2018)

Characterisation of micro-lattices fabricated by selective laser melting
由: Wiria, Florencia Edith, et al.
出版: (2016)

Selective Laser Melting Of Aluminium Metal Matrix Composites
由: Sercombe, Timothy B., et al.
出版: (2016)

Fabrication of titanium based biphasic scaffold using selective laser melting and collagen immersion
由: Sing, Swee Leong, et al.
出版: (2018)

A Comparative Study on Selective Laser Melting and Electron Beam Melting Process for Orthopedic Implants
由: Khalid Rafi, Haludeen, et al.
出版: (2016)

Metal 3D printing via selective laser melting and direct metal deposition: materials, properties and applications
由: Wang, Jing Jing, et al.
出版: (2016)

Effective heat conduction evaluation of lattice structures from selective laser melting printing
由: Zhou, Yi, et al.
出版: (2024)

Saturated pool boiling of FC-72 from enhanced surfaces produced by Selective Laser Melting
由: Ho, Jin Yao, et al.
出版: (2021)

Experimental investigation on magnetic abrasive finishing for internal surfaces of waveguides produced by selective laser melting
由: Wang, Liaoyuan, et al.
出版: (2024)

Practical support structures for selective laser melting
由: Gan, Ming Xuan, et al.
出版: (2018)

Selective Laser Melting Of Spodumene: An Exploratory Study
由: Gan, Mingxuan, et al.
出版: (2016)

Processing of Dissimilar Metals in Selective Laser Melting
由: Sing, Swee Leong, et al.
出版: (2016)

Properties of selective laser melted spodumene glass-ceramic
由: Gan, Ming Xuan, et al.
出版: (2018)

A computational study on porosity evolution in parts produced by selective laser melting
由: Tan, Jie Lun, et al.
出版: (2019)

Direct Manufacture of Non-Assembly Mechanism by Selective Laser Melting
由: Wang, Di, et al.
出版: (2016)

Microstructure modification of 3D printed aluminium alloys by friction stir processing
由: Du, Zheng Lin, et al.
出版: (2022)

Evaluation of Residual Stress in Selective Laser Melting of 316L Steel
由: Yadroitsava, Ina, et al.
出版: (2016)

Influence of the geometric factor for the width of the contour scan in selective laser melting
由: Ahn, Il Hyuk, et al.
出版: (2016)

Microstructures and Texture of Inconel 718 Alloy Fabricated by Selective Laser Melting
由: Shuai, Li, et al.
出版: (2016)

Selective Laser Melting of Density Graded TI6AL4V
由: Low, Kin Huat, et al.
出版: (2016)

Direct Metal Tool Fabrication of AISI 420 Tool Steel by Selective Laser Melting
由: Zhao, Xiao, et al.
出版: (2016)

Simulating The Dynamic Deformation Behaviour Of Selective Laser Melted Stainless Steel Microlattice Structures
由: Li, Peifeng
出版: (2016)

Recrystallization-based grain boundary engineering of 316L stainless steel produced via selective laser melting
由: Gao, Shubo, et al.
出版: (2022)

The effect of scanning strategy on the thermal behavior and residual stress distribution of damping alloys during selective laser melting
由: Yan, Zhiqiang, et al.
出版: (2024)

A Numerical Study on the Melt Track in Selective Laser Melting Using Aluminium Alloy 6061
由: Sing, S. L., et al.
出版: (2016)

Review Of The Fatigue Performance Of Stainless Steel 316L Parts Manufactured By Selective Laser Melting
由: Zhang, Meng, et al.
出版: (2016)

Optimization of selective laser melting (SLM) fabrication quality for Ti6Al4V alloy: experimental and numerical study with introduction of remelting process
由: Su, Chunjian, et al.
出版: (2024)

Experimental and numerical investigation of the surface reliefs formed on a moving silicon substrate by pulses of a Gaussian laser
由: Wee, T.-S., et al.
出版: (2014)

Mitigation of liquation cracking in selective laser melted Inconel 718 through optimization of layer thickness and laser energy density
由: Luu, Duy Nghia, et al.
出版: (2022)

Laser melting characterization for H13-steel 3D printing
由: Jung, Im Doo, et al.
出版: (2018)

Preliminary Investigation On Selective Laser Melting Of Pure Tin
由: Yap, Chor Yen, et al.
出版: (2016)

SELECTIVE LASER MELTING OF HIGH PERFORMANCE FERROUS ALLOYS
由: TAN YONG HAO
出版: (2022)

Finite Element Analysis Of Temperature Field In Selective Laser Melting Process
由: Tan, Peng Fei, et al.
出版: (2016)

Selective Laser Melting of Metal Powders Studied by Molecular Dynamics Simulation
由: Tang, C., et al.
出版: (2016)

State-of-the-Art Review on Selective Laser Melting of Non-Ferrous Metals
由: Yap, Chor Yen, et al.
出版: (2016)

Selective Laser Melting Of Copper Based Alloy On Steel: A Preliminary Study
由: Tey, Cher Fu, et al.
出版: (2016)

On the corrosion resistance of some selective laser melted alloys
由: Suryawanshi, Jyoti, et al.
出版: (2021)