Influence of re-melting on surface roughness and porosity of AlSi10Mg parts fabricated by selective laser melting
Re-melting strategies with same and opposite directions to the first scanning routine were performed in AlSi10Mg parts by selective laser melting (SLM) technology. Surface roughness and porosity were investigated with confocal microscopy, micro-computed tomography (CT) and optical microscopy (OM). R...
Saved in:
Main Authors: | Yu, Wenhui, Sing, Swee Leong, Chua, Chee Kai, Tian, Xuelei |
---|---|
Other Authors: | School of Mechanical and Aerospace Engineering |
Format: | Article |
Language: | English |
Published: |
2020
|
Subjects: | |
Online Access: | https://hdl.handle.net/10356/143175 |
Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
Institution: | Nanyang Technological University |
Language: | English |
Similar Items
-
Effects of re-melting strategies on densification behavior and mechanical properties of selective laser melted AlSi10Mg parts
by: Chua, Chee Kai, et al.
Published: (2018) -
A Comparative Study on Selective Laser Melting and Electron Beam Melting Process for Orthopedic Implants
by: Khalid Rafi, Haludeen, et al.
Published: (2016) -
A computational study on porosity evolution in parts produced by selective laser melting
by: Tan, Jie Lun, et al.
Published: (2019) -
Characterisation of micro-lattices fabricated by selective laser melting
by: Wiria, Florencia Edith, et al.
Published: (2016) -
Initial Study of Selective Laser Melting of ZrO2/Al2O3 Ceramic
by: Zhao, Ziqiang, et al.
Published: (2016)