Blast tests and FEA calibration

Blast tests and FEA calibration

This document mostly reports on the efforts to determine whether the steel and sandwich structures were affected by the combined blast and fragment loading to the same extent as was seen for the RC structures. Of especial importance was to determine whether the impacts, besides transmitting signific...

Saved in:

書目詳細資料
Main Authors:	Del Linz, Paolo, Fung, Tat Ching, Lee, Chi King
其他作者:	Fung Tat Ching
格式:	Research Report
語言:	English
出版:	Nanyang Technological University 2020
主題:	Engineering::Civil engineering::Structures and design Engineering::Mechanical engineering::Mechanics and dynamics
在線閱讀:	https://hdl.handle.net/10356/143813
標簽:	添加標簽沒有標簽, 成為第一個標記此記錄!

相似書籍

Impact tests and pre blast tests predictions
由: Del Linz, Paolo, et al.
出版: (2020)

Fixed supports and realistic blast studies
由: Del Linz, Paolo, et al.
出版: (2020)

Fixed-end slab parametric study and sandwich and steel panels quasi static and impact tests
由: Del Linz, Paolo, et al.
出版: (2020)

Advanced scenario modelling
由: Del Linz, Paolo, et al.
出版: (2020)

Conversion of combined blast and fragment models for quasi static analysis
由: Del Linz, Paolo, et al.
出版: (2020)

Literature review on existing analysis and design methodology for FRP-strengthened RC walls subject to near-field blast effect
由: Fung, Tat Ching, et al.
出版: (2020)

Development of engineering tools and design guidelines for FRP strengthened RC walls subject to near field blast loading
由: Fung, Tat Ching, et al.
出版: (2020)

Analysis and optimization of flow module frame using finite element analysis (FEA)
由: Chua, Yek Guo
出版: (2015)

High-fidelity physics based models (HFPBM) for FRP-strengthened RC walls subject to near-field blast effects and fragment loading
由: Fung, Tat Ching, et al.
出版: (2020)

Literature review of CB&F and numerical study of basic scenario
由: Del Linz, Paolo, et al.
出版: (2020)

Parametric studies on the behaviour of FRP-strengthened RC wall subject to near-field blast effects and fragment loading and development of fast running model (FRM)
由: Fung, Tat Ching, et al.
出版: (2020)

Experimental study and CFD/ FEA simulations of the fluid-structure interactions in a 3D printing process
由: Nursyafiq Hirdafi Koh Nur Iman Koh
出版: (2020)

Dynamic fracture mechanics of FRP-concrete interface
由: Li, Gen
出版: (2020)

Blast contour in near field of the charge
由: Zhao, Kun.
出版: (2008)

Failure analysis and damage prevention on offshore pipelines under extreme loadings
由: Zhang, Yanmei
出版: (2016)

Finite Element Analysis (FEA) of fatigue case studies
由: Muhammad Rohaizad
出版: (2020)

Face sheet shear-off constraints added in design of blast resistance panel
由: Phoon, Chee Khoon.
出版: (2009)

Analysis and design of blast-resistant structures
由: Yang, Guichang
出版: (2008)

Numerical review of Jones-Wilkins-Lee parameters for trinitrotoluene explosive in free-air blast
由: Giam, Anthoni, et al.
出版: (2022)

Analysis of metallic cellular materials for blast mitigation
由: Ye, Ziqing
出版: (2008)

Steel beam responses under blast loading
由: Wei, Ke Wu.
出版: (2011)

Blast induced ground shock effects on pile foundations
由: Jayasinghe, Laddu Bhagya, et al.
出版: (2015)

Design of advanced materials for blast protection of civil structures
由: Ma, Guo Wei
出版: (2009)

Residual strength of blast damaged reinforced concrete column
由: Bao, Xiaoli
出版: (2008)

Residual strength of blast damaged reinforced concrete columns
由: Nair, Anand
出版: (2010)

Static and blast response of steel fibre reinforced concrete
由: Xiao, Jiarun
出版: (2008)

Interferometer utilization in LC2002 spatial light modulator phase retardation and grayscale calibration
由: Wihaga Satya Khresna.
出版: (2010)

Influence of drawing practices on Co-Cr-Ni wires using FEA
由: Khoo, Guan Chiap
出版: (2017)

Residual axial capacity of reinforced concrete columns with simulated blast damage
由: Li, Bing, et al.
出版: (2012)

Durability properties and microstructure of ground granulated blast furnace slag cement concrete
由: Divsholi, Bahador Sabet, et al.
出版: (2015)

Effect of blast and gas pressure on debris launching velocity under internal detonation
由: Yu, Qing Jun, et al.
出版: (2011)

Damage assessment of structures against blast load based on mode approximation method
由: Huang, Xin
出版: (2011)

New deformation-controlled design of reinforced concrete flexural members subjected to blast loadings
由: Li, Bing, et al.
出版: (2014)

Development of damage prediction models for plain concrete and FRP strengthened RC plates under near-field blast and projectile impact effects
由: Tu, Huan
出版: (2021)

Performance-based blast resistant design of reinforced concrete frame structures under distant explosions
由: Rong, Haicheng
出版: (2008)

Numerical simulation of debris throw after breaking up of a concrete struture by blast load
由: Xiong, Can
出版: (2011)

Durability of high performance concrete incorporating normal and ultra fine ground granulated blast furnace slag
由: Loo, Shu Ning.
出版: (2012)

Vibration testing of rail steel clamp devices
由: Ling, Han Kiat
出版: (2022)

Automatic metric 3D surface mesh generation using subdivision surface geometrical model. Part 2 : mesh generation algorithm and examples
由: Lee, Chi King
出版: (2014)

On curvature element-size control in metric surface mesh generation
由: Lee, Chi King
出版: (2014)