Fabrication of zinc substrate encapsulated by fluoropolyurethane and its drag-reduction enhancement by chemical etching

• Main Authors: Li, Yuanzhe, Cui, Zhe, Zhu, Qiucheng, Narasimalu, Srikanth, Dong, Zhili
• Other Authors: School of Materials Science and Engineering
• Format: Article
• Language: English
• Published: 2021
• Subjects: Engineering::Materials; Fluoropolyurethane; Zinc Substrate
• Online Access: https://hdl.handle.net/10356/146050
• Institution: Nanyang Technological University

A fluoropolyurethane-encapsulated process was designed to rapidly fabricate low-flow resistance surfaces on the zinc substrate. For the further enhancement of the drag-reduction effect, Cu2+-assisted chemical etching was introduced during the fabrication process, and its surface morphology, wettability, and flow-resistance properties in a microchannel were also studied. It is indicated that the zinc substrate with a micro-nanoscale roughness obtained by Cu2+-assisted nitric acid etching was superhydrophilic. However, after the etched zinc substrate is encapsulated with fluoropolyurethane, the superhydrophobic wettability can be obtained with a contact angle of 154.8° ± 2.5° and a rolling angle of less than 10°. As this newly fabricated surface was placed into a non-standard design microchannel, it was found that with the increase of Reynolds number, the drag-reduction rate of the superhydrophobic surface remained basically unchanged at 4.0% compared with the original zinc substrate. Furthermore, the prepared superhydrophobic surfaces exhibited outstanding reliability in most liquids.