Attachable micropseudocapacitors using highly swollen laser-induced-graphene electrodes

For powering wearable electronics, extensive research has been directed toward microscale flexible and stretchable energy-storage devices. Microsupercapacitors, though promising candidates, remain limited in terms of design flexibility, scalability, reusability, and compatibility with general substr...

Full description

Saved in:
Bibliographic Details
Main Authors: Lee, Yeong A., Lim, Joel, Cho, Younghyun, Lee, Hyub, Park, Sangbaek, Lee, Go-Woon, Yoo, Chung-Yul, Park, Sang Hyun, Murukeshan, Vadakke Matham, Kim, Seungchul, Kim, Young-Jin, Yoon, Hana
Other Authors: School of Mechanical and Aerospace Engineering
Format: Article
Language:English
Published: 2021
Subjects:
Online Access:https://hdl.handle.net/10356/146270
Tags: Add Tag
No Tags, Be the first to tag this record!
Institution: Nanyang Technological University
Language: English
id sg-ntu-dr.10356-146270
record_format dspace
spelling sg-ntu-dr.10356-1462702021-02-06T20:11:26Z Attachable micropseudocapacitors using highly swollen laser-induced-graphene electrodes Lee, Yeong A. Lim, Joel Cho, Younghyun Lee, Hyub Park, Sangbaek Lee, Go-Woon Yoo, Chung-Yul Park, Sang Hyun Murukeshan, Vadakke Matham Kim, Seungchul Kim, Young-Jin Yoon, Hana School of Mechanical and Aerospace Engineering Singapore Centre for 3D Printing Engineering Microsupercapacitor Laser Direct Writing For powering wearable electronics, extensive research has been directed toward microscale flexible and stretchable energy-storage devices. Microsupercapacitors, though promising candidates, remain limited in terms of design flexibility, scalability, reusability, and compatibility with general substrates. This paper reports a high-performance sticker-type flexible microsupercapacitor using highly swollen reduced-graphene-oxide electrodes fabricated by an ultrashort-pulse laser to promote full active-site and durability of the electrodes. Our sticker-type flexible micropseudocapacitor provides a comparable volumetric energy density of 1.08 mWh cm−3 and 13 times higher volumetric power density of 83.5 mW cm−3 compared to conventional lithium thin-film batteries. Bio-inspired surface modifications are additionally applied to the reduced-graphene-oxide electrodes, which provides a six-fold increase (10.38 mF cm−2) of the areal capacitance. A 6 × 2 micropseudocapacitor array embedded in a sub-millimeter thin PDMS film adheres to safety goggles and successfully powers a μ-LED. The total capacitance of the array is maintained at ~97% of its original value after 200 repetitive attachments and detachments showing good durability. In addition, the sticker-type micropseudocapacitor array shows a stable performance under repeated deformation, and up to ~99% of capacitance retention after 200 bending cycles. This novel re-attachable flexible micropseudocapacitor will expedite the widespread use of flexible and wearable devices. National Research Foundation (NRF) Accepted version This work was supported by the Research and Development Program of the Korea Institute of Energy Research (KIER) [grant number B9-2461-02, B9-2434-01, B9-2434-03) (to H. Y.); and the National Research Foundation of Korea (NRF) grant funded by the Korea government (MSIT) (No. 2018R1C1B5085456) (to Y. C.). Y.-J. Kim acknowledges financial support by an NRF Fellowship (NRF-NRFF2015-02) from the Singapore National Research Foundation and by a research collaboration agreement by Panasonic Factory Solutions Asia Pacific (PFSAP) and Singapore Centre for 3D Printing (RCA-15/027). S. K. acknowledges financial support from the Creative Materials Discovery Program (NRF-2017M3D1A1039287) and the Basic Research Lab Program (NRF-2018R1A4A1025623) through the National Research Foundation of Korea (NRF) funded by the Ministry of Science, ICT, and Future Planning. 2021-02-04T08:33:12Z 2021-02-04T08:33:12Z 2020 Journal Article Lee, Y. A., Lim, J., Cho, Y., Lee, H., Park, S., Lee, G.-W., ... Yoon, H. (2020). Attachable micropseudocapacitors using highly swollen laser-induced-graphene electrodes. Chemical Engineering Journal, 386, 123972-. doi:10.1016/j.cej.2019.123972 1385-8947 0000-0002-8397-6126 0000-0002-9175-2229 https://hdl.handle.net/10356/146270 10.1016/j.cej.2019.123972 2-s2.0-85077698779 386 123972 en Chemical Engineering Journal © 2020 Elsevier B.V. All rights reserved. This paper was published in Chemical Engineering Journal and is made available with permission of Elsevier B.V. application/pdf
institution Nanyang Technological University
building NTU Library
continent Asia
country Singapore
Singapore
content_provider NTU Library
collection DR-NTU
language English
topic Engineering
Microsupercapacitor
Laser Direct Writing
spellingShingle Engineering
Microsupercapacitor
Laser Direct Writing
Lee, Yeong A.
Lim, Joel
Cho, Younghyun
Lee, Hyub
Park, Sangbaek
Lee, Go-Woon
Yoo, Chung-Yul
Park, Sang Hyun
Murukeshan, Vadakke Matham
Kim, Seungchul
Kim, Young-Jin
Yoon, Hana
Attachable micropseudocapacitors using highly swollen laser-induced-graphene electrodes
description For powering wearable electronics, extensive research has been directed toward microscale flexible and stretchable energy-storage devices. Microsupercapacitors, though promising candidates, remain limited in terms of design flexibility, scalability, reusability, and compatibility with general substrates. This paper reports a high-performance sticker-type flexible microsupercapacitor using highly swollen reduced-graphene-oxide electrodes fabricated by an ultrashort-pulse laser to promote full active-site and durability of the electrodes. Our sticker-type flexible micropseudocapacitor provides a comparable volumetric energy density of 1.08 mWh cm−3 and 13 times higher volumetric power density of 83.5 mW cm−3 compared to conventional lithium thin-film batteries. Bio-inspired surface modifications are additionally applied to the reduced-graphene-oxide electrodes, which provides a six-fold increase (10.38 mF cm−2) of the areal capacitance. A 6 × 2 micropseudocapacitor array embedded in a sub-millimeter thin PDMS film adheres to safety goggles and successfully powers a μ-LED. The total capacitance of the array is maintained at ~97% of its original value after 200 repetitive attachments and detachments showing good durability. In addition, the sticker-type micropseudocapacitor array shows a stable performance under repeated deformation, and up to ~99% of capacitance retention after 200 bending cycles. This novel re-attachable flexible micropseudocapacitor will expedite the widespread use of flexible and wearable devices.
author2 School of Mechanical and Aerospace Engineering
author_facet School of Mechanical and Aerospace Engineering
Lee, Yeong A.
Lim, Joel
Cho, Younghyun
Lee, Hyub
Park, Sangbaek
Lee, Go-Woon
Yoo, Chung-Yul
Park, Sang Hyun
Murukeshan, Vadakke Matham
Kim, Seungchul
Kim, Young-Jin
Yoon, Hana
format Article
author Lee, Yeong A.
Lim, Joel
Cho, Younghyun
Lee, Hyub
Park, Sangbaek
Lee, Go-Woon
Yoo, Chung-Yul
Park, Sang Hyun
Murukeshan, Vadakke Matham
Kim, Seungchul
Kim, Young-Jin
Yoon, Hana
author_sort Lee, Yeong A.
title Attachable micropseudocapacitors using highly swollen laser-induced-graphene electrodes
title_short Attachable micropseudocapacitors using highly swollen laser-induced-graphene electrodes
title_full Attachable micropseudocapacitors using highly swollen laser-induced-graphene electrodes
title_fullStr Attachable micropseudocapacitors using highly swollen laser-induced-graphene electrodes
title_full_unstemmed Attachable micropseudocapacitors using highly swollen laser-induced-graphene electrodes
title_sort attachable micropseudocapacitors using highly swollen laser-induced-graphene electrodes
publishDate 2021
url https://hdl.handle.net/10356/146270
_version_ 1692012968369192960