Non-stoichiometric fibrous apatite for heavy metal ion capture

In this study, two different methods were used to synthesis hydroxyapatite (HA, Ca10(PO4)6(OH)2). Fibrous HA was synthesised by hydrothermal reaction and HA powders were obtained from high temperature solid state reaction. Kinetics and thermodynamics of lead sorption from aqueous lead nitrate sol...

全面介紹

Saved in:
書目詳細資料
主要作者: Tan, Amos Zhong Min.
其他作者: Srinivasan Madhavi
格式: Final Year Project
語言:English
出版: 2009
主題:
在線閱讀:http://hdl.handle.net/10356/15376
標簽: 添加標簽
沒有標簽, 成為第一個標記此記錄!
機構: Nanyang Technological University
語言: English
實物特徵
總結:In this study, two different methods were used to synthesis hydroxyapatite (HA, Ca10(PO4)6(OH)2). Fibrous HA was synthesised by hydrothermal reaction and HA powders were obtained from high temperature solid state reaction. Kinetics and thermodynamics of lead sorption from aqueous lead nitrate solutions with initial lead concentration of 2590 ppm by fibrous HA and HA powders were investigated for different durations, between 1-336 hours at various temperatures of 23°C, 50°C and 80°C. It was deduced by Rietveld analysis that the sorption capacities of both HA materials increased with the increase in temperature through the growing proportions of hydroxypyromorphite (HP), Pb10(PO4)6(OH)2. Fibrous HA displayed better performance in better lead uptake capabilities due to their higher solubility, lower crystallinity and oriented crystals as compared to HA powders. The maximum sorption capacity of fibrous HA for Pb2+ ions at 80°C for 240h was 2.42 mmol/g relative to 0.67 mmol/g for the HA powders at the same temperature, with 2.50 mmol/g being the maximum possible amount of lead sorbed by HA. Fresh HA materials and samples previously exposed to lead were also analyzed via scanning electron microscopy (SEM) and the detection of HP reinforced the hypothesis that its formation is the end of a kinetic process in which the HP crystals are continuously dissolved and recrystallised in order to form more stable structures with higher lead content. The first-order kinetic model was used to describe the kinetic data, and the data constants were evaluated. The activation energy was also calculated from fitting the Arrhenius equation with the graph of ln K against temperature inverse. Fibrous HA has activation energy of 54.92kg/mol. Hence, fibrous HA can be considered as a potential adsorbent for the remediation of lead ions in contaminated industrial wastewaters.