Improving surface performance of silicone rubber for composite insulators by multifunctional Nano-coating
Composite insulator is an important component of outdoor insulation systems. It works in complex environments and faces a series of problems such as surface contamination, loss of hydrophobicity, and accumulation of surface charges, which may eventually lead to flashover. Aiming to solve these probl...
Saved in:
Main Authors: | , , , , , , |
---|---|
Other Authors: | |
Format: | Article |
Language: | English |
Published: |
2022
|
Subjects: | |
Online Access: | https://hdl.handle.net/10356/162863 |
Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
Institution: | Nanyang Technological University |
Language: | English |
Summary: | Composite insulator is an important component of outdoor insulation systems. It works in complex environments and faces a series of problems such as surface contamination, loss of hydrophobicity, and accumulation of surface charges, which may eventually lead to flashover. Aiming to solve these problems in a simple and scalable method, we propose a multifunctional nano-coating based on SiO2/PDMS/EP. By the combination of multiscale structure and low surface energy modification, this coating shows excellent water-repellency performance, a large contact angle greater than 160° and a small rolling angle near 0° are achieved on coated silicone rubber, which enables the surface with excellent self-cleaning performance. Benefiting from the multiscale roughness, the heat transfer is inhibited by the reduced contact area, which further slows down the icing process on coated silicone rubber. The de-icing force on coated silicone rubber is also smaller than that on pristine silicone rubber. This coating also introduces many shallow traps to the surface, which is beneficial to the fast surface charge dissipation in a short time. Besides, the high water-repelling ability can promote the droplet to roll away under the action of electrical field force, which alleviates the electrical distortion caused by the droplets. As a result, the wet flashover voltage of coated silicone rubber is 60% higher than that of pristine silicone rubber. This multifunctional coating is a facile, scalable, and effective approach to improving the comprehensive surface performance of insulators. |
---|