Biopolymeric fibrous scaffolds for tissue engineering.
Scaffolds play a vital role in tissue engineering in mimicking the extra cellular matrix, such that it provides suitable environment for tissue regeneration. Recent studies have shown that Pullulan is a potential biomaterial for vascular engineering due to its biocompatibility and superior mechanica...
Saved in:
| Main Author: | |
|---|---|
| Other Authors: | |
| Format: | Final Year Project |
| Language: | English |
| Published: |
2009
|
| Subjects: | |
| Online Access: | http://hdl.handle.net/10356/16559 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Institution: | Nanyang Technological University |
| Language: | English |
| Summary: | Scaffolds play a vital role in tissue engineering in mimicking the extra cellular matrix, such that it provides suitable environment for tissue regeneration. Recent studies have shown that Pullulan is a potential biomaterial for vascular engineering due to its biocompatibility and superior mechanical strength. The feasibility of using Pullulan as a scaffolding material is still at its infancy stage; therefore, further the exploration of the applications of Pullulan is required.
The purpose of this project is to conduct preliminary studies to investigate the viability of fabricating Pullulan scaffolds that can enhance cell development through the use of the electrospinning technique. Various electrospinning parameters can greatly influence the construct of the fibers. Therefore, this project focuses on determining the optimum electrospinning parameters that are able to fabricate a scaffold that constitutes uniform morphologies for cell support.
Different polymer blend ratios of Pullulan and Dextran, syringe tip to collector distances, flow rates, applied voltages, polymer concentrations, types of solvent, solvent concentration and crosslinker concentrations were investigated with the aim of producing uniform fiber diameters and good spin ability. The image analysis by scanning electron microscopy and image analysis software Image J, show that fibers could be successfully electrospun into the nanometer region of 200-500nm. Mechanical strengths measured by Instron tensile tester showed that a higher crosslinker concentration could produce scaffolds with higher elastic modulus.
These findings would be useful in optimization of a scaffold from the polymer blend of Pullulan and Dextran through electrospinning. |
|---|