DED process parameters optimization via experiments
The additive manufacturing (AM) technique Directed Energy Deposition (DED) specializes in mending, quick prototyping, and low-volume part manufacturing. Due to its tremendous advantages, it is commonly employed in various sectors, such as aerospace, healthcare, and the military. A common material to...
محفوظ في:
| المؤلف الرئيسي: | |
|---|---|
| مؤلفون آخرون: | |
| التنسيق: | Final Year Project |
| اللغة: | English |
| منشور في: |
Nanyang Technological University
2023
|
| الموضوعات: | |
| الوصول للمادة أونلاين: | https://hdl.handle.net/10356/167312 |
| الوسوم: |
إضافة وسم
لا توجد وسوم, كن أول من يضع وسما على هذه التسجيلة!
|
| الملخص: | The additive manufacturing (AM) technique Directed Energy Deposition (DED) specializes in mending, quick prototyping, and low-volume part manufacturing. Due to its tremendous advantages, it is commonly employed in various sectors, such as aerospace, healthcare, and the military. A common material to work with is 316L stainless steel because of its excellent tensile and corrosion-resistant qualities.
For this project, 5 process parameters (Laser Power, Scanning Speed, Powder Mass flow rate, XY-Incremental ratio, and Z Incremental ratio) were varied with different values to get a correlation with the microstructure parameters (Grain Area, Grain Ellipse aspect ratio, and Grain angle) and the mechanical property (Ultimate Tensile Strength) of a multi-layer multi-track deposition.
The microstructure was analysed using Electron Backscatter Diffraction (EBSD) method and a relationship between the process parameters, microstructure parameters, and the ultimate tensile strength was concluded. |
|---|