Laser metal deposition of low carbon 410L stainless steel and heat treatment

• Main Authors: Zhai, Wengang, Wu, Naien, Zhou, Wei
• Other Authors: School of Mechanical and Aerospace Engineering
• Format: Article
• Language: English
• Published: 2023
• Subjects: Engineering::Mechanical engineering; Additive Manufacturing; Ferritic/Martensitic Stainless Steel
• Online Access: https://hdl.handle.net/10356/169322
• Institution: Nanyang Technological University

Additive manufacturing (AM) of 410L ferritic/martensitic stainless steel via laser metal deposition (LMD) process is investigated. The carbon content of 410L powder used is low at 0.004 wt%. Heat treatment is utilized to study the microstructure and mechanical properties evolution of the deposited material. The microstructure of as-built low carbon 410L includes equiaxed ferrite phase, widmanstatten ferrite, martensite, and (Fe,Cr)23C6 nanoprecipitates. After heat treatment at 1000 °C for 10 min, refined equiaxed grains and high fraction of martensitic phase are formed. The yield strength is 601.9 MPa for as-built condition and 930.6 MPa for heat-treated condition (1000 °C/10 min); the ultimate tensile strength (UTS) is 923.0 MPa for as-built condition and 1101.5 MPa for the heat-treated condition (1000 °C/10 min); the elongation is 17.7% for as-built condition and 15.1% for the heat-treated condition (1000 °C/10 min). The low carbon 410L fabricated using LMD shows a better combination of high strength and good ductility compared with 12Cr stainless steels with higher carbon contents fabricated using conventional processes. This study provides a benchmark of 410L stainless steel fabricated using fusion-based metal AM process.