The influence of alcohol, carbonate and polyethers as oxygenated fuels on the soot characteristics from a CI engine

• Main Authors: Tan, Yong Ren, Zhu, Qiren, Zong, Yichen, Lai, Jiawei, Salamanca, Maurin, Akroyd, Jethro, Yang, Wenming, Kraft, Markus
• Other Authors: School of Chemical and Biomedical Engineering
• Format: Article
• Language: English
• Published: 2023
• Subjects: Engineering::Chemical engineering; Polyoxymethylene Dimethyl Ether; Particle Size Distribution
• Online Access: https://hdl.handle.net/10356/170667
• Institution: Nanyang Technological University

Dimethyl carbonate (DMC), ethanol (EtOH), polyoxymethylene dimethyl ether 1 (PODE1) and polyoxymethylene dimethyl ether 4 (PODE4) were blended with Jet A1 into fuel blends with 5 % oxygen content to investigate the effect of the oxygenated fuels on the soot produced by a compression ignition engine. Particle size distribution (PSD) was measured using a differential mobility spectrometer. Thermogravimetric analysis (TGA), Raman spectroscopy, ultraviolet–visible spectroscopy (UV–Vis) and Fourier transform infrared (FT-IR) spectroscopy were performed on the soot collected from the engine. The addition of EtOH, PODE1 improves brake thermal efficiency (BTE) by up to 4.5 %, while DMC reduces BTE by 0.9–1.5 % compared to Jet A1. EtOH fuel blends have the shortest combustion duration (10.0 deg), followed by PODE1, DMC and PODE4. EtOH blends also have the highest heat release rate peak (4–14 % higher than Jet A1). This, combined with improved premixing of EtOH fuel blend in the engine improves the combustion and reduces soot growth. PSD measurements showed that the addition of EtOH significantly reduces accumulation mode particle number concentrations by up to 70 % but promotes the formation of nucleation mode particles. Meanwhile, TGA revealed that the soot from oxygenated fuel blends oxidises at a lower temperature than Jet A1. Notably, PODE1 exhibited a reduction of 54 °C in the starting oxidation temperature, which is the largest reduction among the oxygenated fuel blends. Lastly, the conjugation length of the soot aromatic structure for the organic carbons (derived from the optical band gap of UV–Vis) is up to 11 % greater for the oxygenated fuel blends, indicating that oxygenated fuel blends promote organic carbon formation. The blending of oxygenated fuels in influencing the soot properties through the dilution effect, combustion condition effect and chemical effect is then critically assessed.