The Portevin-Le Chatelier effect of Cu-2.0Be alloy during hot compression

• Main Authors: Zhu, Daibo, Wu, Na, Liu, Yang, Liu, Xiaojin, Jiang, Chaohua, Jiang, Yanbin, Zhao, Hongyun, Cui, Shuhui, Xie, Guilan
• Other Authors: School of Materials Science and Engineering
• Format: Article
• Language: English
• Published: 2023
• Subjects: Engineering::Materials; Cu-Be Alloy; Serrations
• Online Access: https://hdl.handle.net/10356/171651
• Institution: Nanyang Technological University

The Portevin-Le Chatelier effect of Cu-2.0Be alloy was investigated using hot isothermal compression at varying strain rates (0.01-10 s-1) and temperature (903-1063 K). An Arrhenius-type constitutive equation was developed, and the average activation was determined. Both strain-rate-sensitive and temperature-sensitive serrations were identified. The stress-strain curve exhibited three types of serrations: type A at high strain rates, type B (mixed A + B) at medium strain rates, and type C at low strain rates. The serration mechanism is mainly affected by the interaction between the velocity of solute atom diffusion and movable dislocations. As the strain rate increases, the dislocations outpace the diffusion speed of the solute atoms, limiting their ability to effectively pin the dislocations, resulting in lower dislocation density and serration amplitude. Moreover, the dynamic phase transformation triggers the formation of nanoscale dispersive β phases, which impede dislocation and cause a rapid increase in the effective stress required for unpinning, leading to the formation of mixed A + B serrations at 1 s-1.