Efficient degradation of ciprofloxacin via peroxymonosulfate activation over a hierarchically porous Cu-Ti alloy manufactured by 3D printing

Efficient degradation of ciprofloxacin via peroxymonosulfate activation over a hierarchically porous Cu-Ti alloy manufactured by 3D printing

3D printed alloy catalysts have garnered significant attention in water purification due to their high efficiency, adaptable structure, and easy recovery. Here, a straightforward and cost-effective three-dimensional (3D) printing strategy is adopted to synthesize a copper-titanium (Cu-Ti) alloy for...

Saved in:

書目詳細資料
Main Authors:	Guo, Sheng, Gao, Xizi, Huang, Yao, Zhou, Runhua, Chen, Fengxi, Cai, Chao, Zhou, Kun, Chen, Rong
其他作者:	School of Mechanical and Aerospace Engineering
格式:	Article
語言:	English
出版:	2024
主題:	Engineering 3D print Ciprofloxacin
在線閱讀:	https://hdl.handle.net/10356/181229
標簽:	添加標簽沒有標簽, 成為第一個標記此記錄!
機構:	Nanyang Technological University
語言:	English

相似書籍

Pharmacokinetic Interaction between ciprofloxacin and Itraconazole in Healthy Volunteers
由: Somchai Sriwiriyajan
出版: (2013)

Pharmacokinetic interaction between ciprofloxacin and itraconazole in health volunteers
由: Maseetoh Samaeng
出版: (2011)

A new therapeutic avenue for bronchiectasis : dry powder inhaler of ciprofloxacin nanoplex exhibits superior ex vivo mucus permeability and antibacterial efficacy to its native ciprofloxacin counterpart
由: Tran, The-Thien, et al.
出版: (2020)

Optosensor based on multiwall carbon nanotubes and quantum dots incorporated into a molecularly imprinted polymer for ciprofloxacin detection
由: Naphat Yuphintharakun
出版: (2019)

Genetic characterization of Ciprofloxacin resistance in Mycobacterium tuberculosis
由: Chudaachhara Unhasuta
出版: (2009)

Ciprofloxacin HCl and quercetin functionalized electrospun nanofiber membrane : fabrication and its evaluation in full thickness wound healing
由: Ajmal, Gufran, et al.
出版: (2020)

Molecular analysis of ciprofloxacin resistance among non-typhoidal Salmonella with reduced susceptibility to ciprofloxacin isolated from patients at a tertiary care Hospital in Kuala Lumpur, Malaysia
由: Karunakaran, R., et al.
出版: (2016)

A comparative study of the distribution of ofloxacin and ciprofloxacin in prostatic tissues after simultaneous oral ingestion
由: Png, J.C.D., et al.
出版: (2014)

Antibiotics Used in Regenerative Endodontics Modify Immune Response of Macrophages to Bacterial Infection
由: En En Tan, et al.
出版: (2022)

3D printing of bio-inspired porous polymeric solar steam generators for efficient and sustainable desalination
由: Hou, Yanbei, et al.
出版: (2024)

Combination ciprofloxacin and metronidazole in severe perianal Crohn's disease
由: Solomon, M.J, et al.
出版: (2020)

Surface construction of nitrogen-doped chitosan-derived carbon nanosheets with hierarchically porous structure for enhanced sulfacetamide degradation via peroxymonosulfate activation : maneuverable porosity and active sites
由: Chen, Xiao, et al.
出版: (2021)

An evaluation of inhaled antibiotic liposome versus antibiotic nanoplex in controlling infection in bronchiectasis
由: Tran, The-Thien, et al.
出版: (2020)

Inkjet-Printed Porous Silver Thin Film as a Cathode for a Low-Temperature Solid Oxide Fuel Cell
由: Yu, Chen-Chiang, et al.
出版: (2017)

Direct vat-photopolymerisation 3D printing of hierarchically porous SiC loaded with Co/Ni based catalysts by using Pickering emulsions
由: Ho, Terence Yan King, et al.
出版: (2024)

Toner cloud generation and its supply over the width of printing area
由: Chayanont Chansorn
出版: (2006)

Optimizing aerosol jet printing process of silver ink for printed electronics
由: Agarwala, Shweta, et al.
出版: (2017)

Importance of carbon structure for nitrogen and sulfur co-doping to promote superior ciprofloxacin removal via peroxymonosulfate activation
由: Mohamed Faisal Gasim, et al.
出版: (2023)

Multi-Jet Fusion 3D voxel printing of conductive elastomers
由: Chen, Jiayao, et al.
出版: (2023)

Scalable synthesis of Ca-doped α-Fe₂O₃ with abundant oxygen vacancies for enhanced degradation of organic pollutants through peroxymonosulfate activation
由: Guo, Sheng, et al.
出版: (2022)

Optimizing 3D printing parameters for enhanced microhardness in Ti64 alloys
由: Tan, Ming Wei
出版: (2024)

Effect of printing parameters in 3D concrete printing : printing region and support structures
由: Tay, Daniel Yi Wei, et al.
出版: (2020)

B and M printing
由: Sumayao, Benjamin, et al.
出版: (1978)

Application of Ultrasonic Atomization in the Three Dimensional Printing and Spray Pyolysis
由: Zhou, Yufeng
出版: (2016)

Sustainable support material for overhang printing in 3D concrete printing technology
由: Ting, Andrew Guan Heng, et al.
出版: (2024)

A Bayesian regularization network approach to thermal distortion control in 3D printing
由: Xie, Yuxi, et al.
出版: (2023)

Digital watermarking robust to print-and-scan process
由: ZHOU ZHICHENG
出版: (2010)

A new watermarking scheme robust to print-and-scan
由: Zhou, Z., et al.
出版: (2013)

3D Printing Structures That Exhibit Torsions
由: Noh, Kyoung-Seok, et al.
出版: (2016)

4D printing of reprogrammable liquid crystal elastomers with synergistic photochromism and photoactuation
由: Chen, Mei, et al.
出版: (2023)

Selective Laser Melting Of Nickel Titanium Shape Memory Alloy
由: Leong, Kah Fai, et al.
出版: (2016)

Ternary nanoparticle complex of ciprofloxacin exhibiting sustained release at gastric pH prepared by co-complexation with polyanions and an ionic amphiphile
由: Dong, Bingxue, et al.
出版: (2020)

3D Printed Electronic Tracks for Bio-integrated Free-form Devices
由: Agarwala, Shweta, et al.
出版: (2016)

Hermosa paczyme: Print production package
由: Aprecio, Mary Aileen, et al.
出版: (1995)

Unexpected intrinsic catalytic function of porous boron nitride nanorods for highly efficient peroxymonosulfate activation in water treatment
由: Bao, Yueping, et al.
出版: (2022)

An analysis of the printing business
由: Los Banos, Luis O., Jr.
出版: (1964)

Ultraflexible sensor development via 4D printing: enhanced sensitivity to strain, temperature, and magnetic fields
由: Hou, Yanbei, et al.
出版: (2025)

A Review of Selective Laser Melted NiTi Shape Memory Alloy
由: Khoo, Zhong Xun, et al.
出版: (2018)

Parametric investigation of flexographic printing processes for R2R printed electronics
由: Zhong, Zhao Wei, et al.
出版: (2022)

High speed 4D printing of shape memory polymers with nanosilica
由: Choong, Yu Ying Clarrisa, et al.
出版: (2020)