A novel printed radiating microwave structure
A microstrip-line fed novel microwave waveguide was optimized for efficient excitation (or feed) arrangement and low loss. The waveguide was then modified as an antenna by introducing a slot. For each waveguide structure and antenna structure in the design process, simulation of S-parameters and rad...
Saved in:
主要作者: | |
---|---|
其他作者: | |
格式: | Final Year Project |
語言: | English |
出版: |
2011
|
主題: | |
在線閱讀: | http://hdl.handle.net/10356/45024 |
標簽: |
添加標簽
沒有標簽, 成為第一個標記此記錄!
|
機構: | Nanyang Technological University |
語言: | English |
總結: | A microstrip-line fed novel microwave waveguide was optimized for efficient excitation (or feed) arrangement and low loss. The waveguide was then modified as an antenna by introducing a slot. For each waveguide structure and antenna structure in the design process, simulation of S-parameters and radiation characteristics was carried out using CST Microwave Studio. After that, the final design was fabricated, and simulation results were verified by measurements. S-parameters were measured with a network analyzer; radiation characteristics were measured in a microwave anechoic chamber. Preliminary results showed that there was some agreement between measurement and simulation. |
---|