Hydraulic pressure assisted deep drawing process

Hydraulic pressure assisted deep drawing process

A technique of Hydraulic Pressure Assisted Deep Drawing of Cups for the manufacture of deep cups from sheet metal was being investigated. Complete new tool equipment has been designed and fabricated mainly from High Tensile Steel. This tool was used to draw circular aluminium blanks of 1.0mm thickn...

Saved in:

書目詳細資料
主要作者:	Johnson, John Louis Stanley
其他作者:	Thiruvarudchelvan, Sinnathamby
格式:	Theses and Dissertations
出版:	2008
主題:	DRNTU::Engineering::Mechanical engineering::Fluid mechanics
在線閱讀:	http://hdl.handle.net/10356/5839
標簽:	添加標簽沒有標簽, 成為第一個標記此記錄!

相似書籍

Hydraulic pressure augmented deep drawing process for high draw ratios
由: Wang, Hongbin
出版: (2009)

Hydraulic pressure augmented deep drawing process for large draw ratios
由: Thiruvarudchelvan, Sinnathamby., et al.
出版: (2008)

Mathematical modelling of a hydraulic servomechanism
由: Sugumaran Jeganathan.
出版: (2010)

Servo valve-line hydraulic system
由: Ong, Jia Xian.
出版: (2009)

Characteristics of a hydraulic jump in Bingham fluid
由: Shu, Jian Jun, et al.
出版: (2011)

Novel design and development of a hydraulic timer valve
由: Chen, Dayao.
出版: (2008)

Condition monitoring and fault diagnosis of loaded modern water hydraulic system
由: Tan, Cheng Hock.
出版: (2008)

Condition monitoring of internal leakage in modern water hydraulic cylinders using acoustic emission
由: Chen, Ping
出版: (2009)

Servo valve-line hydraulic system
由: Hon, Alexis Ghim Siew.
出版: (2011)

Importance of chamber gas pressure on processing of Al-based metallic glasses during melt spinning
由: Yang, Hongwang, et al.
出版: (2011)

Microfluidic studies on flow manipulation to assist metastasis research
由: Tran, Duc Quang
出版: (2017)

Rheological behaviors of concentrated suspensions in pressure-driven tube flow
由: Wang, Zhiying
出版: (2008)

Mixed electroosmotic-pressure driven multi-fluid flow in microchannels
由: Li, Haiwang
出版: (2011)

Analysis for design of horizontal pressure vessels with non-sliding saddle supports
由: Zhong, Ling.
出版: (2009)

Shear-induced particle migration in isothermal pressure-driven poiseuille tube flow
由: Tan, Kok Wah.
出版: (2008)

Pressure measurement of a bus model in wind tunnel for the improvement of the bus designs
由: Chin, Chung Han.
出版: (2013)

A finite element model and electronic analogue of pipeline pressure transients with frequency-dependent friction
由: Shu, Jian Jun
出版: (2011)

Analysis of chaotic patterns in Kelvin-Helmholtz instability by deep learning
由: Huang, Xinyuan
出版: (2023)

On the aerodynamic pressure fluctuation around the head gimbals assembly inducing the slider vibration in a hard disk drive
由: Min, Hequn, et al.
出版: (2011)

Aerodynamic pressure fluctuations associated with flow-induced vibration of the head gimbals assembly inside a hard disk drive
由: Min, Hequn, et al.
出版: (2012)

The pinch-off process of the leading vortex ring in a starting jet
由: Gao, Lei
出版: (2011)

Experimental investigation of surface characterization of thin liquid layers on a solid substrate under different heating processes
由: Habeeb Mohamed Mohamed Khalifa
出版: (2009)

MEMS (Micro Electro Mechanical Systems) pressure sensor for water flow velocity and flow direction sensing
由: Goh, Joshua Hui Mun.
出版: (2013)

Role of Atwood number on flow morphology of a planar shock-accelerated square bubble : a numerical study
由: Singh, Satyvir
出版: (2021)

Wind field study for UAV flight corridor in urban environments
由: Zeng, Yunxi
出版: (2019)

Finite element modeling of wire drawing process
由: Ang, Boliang
出版: (2009)

Frictionless flow in channels
由: Tan, John Ding Hao
出版: (2015)

3D measurement of movements of fish fins using high-speed cameras-I
由: Tan, John Wei You
出版: (2015)

Pressure drop in packed column
由: Gadre Rohit Vivek
出版: (2013)

Validation of assisted forward osmosis (AFO) process : impact of hydraulic pressure
由: Blandin, Gaetan, et al.
出版: (2013)

Development of a pressure recovery unit for seawater reverse osmosis system
由: Tan, Yu En
出版: (2008)

Development of a pressure recovery unit for seawater reverse osmosis system
由: Tan, Yu En
出版: (2008)

Experimental study and CFD/ FEA simulations of the fluid-structure interactions in a 3D printing process
由: Nursyafiq Hirdafi Koh Nur Iman Koh
出版: (2020)

Experimental and theoretical investigation of capillary tube flow
由: Ooi, Kim Tiow., et al.
出版: (2008)

Numerical and experimental study of microflows in microfluidic devices
由: Zhao, Yong.
出版: (2008)

Fluid flow and heat transfer characteristics in microchannels
由: Ang, Gabriel Pau Hwee, et al.
出版: (2008)

Condition monitoring and fault diagnosis of fluid power systems
由: Lim, Geok Hian., et al.
出版: (2008)

Development and implementation of a system testing device for microfluidic devices
由: Li, Chengguang
出版: (2008)

Development of novel fluidic flowmeters based on fluid oscillations phenomenon
由: Lua, Aik Chong, et al.
出版: (2008)

Development of a fluidic flowmeter for water flow rate measurements
由: Lua, Aik Chong.
出版: (2008)