Processing and high strain rate superplasticity of P/M 6061 Al alloy and 6061 Al/SiCp composites

Processing and high strain rate superplasticity of P/M 6061 Al alloy and 6061 Al/SiCp composites

The objective of this work is to achieve HSRS in P/M (Powder metallurgy) 6061 Al and composites and to study their deformation characteristics and mechanism of high strain rate superplasticity.

Saved in:

書目詳細資料
主要作者:	Li, Xijiang.
其他作者:	Tan, Ming Jen
格式:	Theses and Dissertations
出版:	2008
主題:	DRNTU::Engineering::Materials::Metallic materials::Alloys
在線閱讀:	http://hdl.handle.net/10356/6077
標簽:	添加標簽沒有標簽, 成為第一個標記此記錄!

相似書籍

Processing and characterization of cast aluminium alloy : SiCp composites
由: Bindumadhavan, Pathangi N.
出版: (2008)

Superplastic deformation behaviour and microstructural evolution of rolled Mg-3Al-1Zn (AZ31B) alloy
由: Tan, Jin Chong.
出版: (2008)

Hot isostatic pressing of SiCp/Al-Li composites
由: Sia, Kheng Yok.
出版: (2009)

High temperature deformation and superplasticity of titanium alloys
由: Zhu, Xuejun
出版: (2010)

Damping behavior of Al6061/albite MMCs
由: Seah, K.H.W., et al.
出版: (2014)

A study of the coefficients of thermal expansion of Al alloy 6061-albite composites
由: Sharma, S.C., et al.
出版: (2014)

Development of processing maps for Al/SiCp composite using fuzzy logic
由: Ramanathan, S., et al.
出版: (2014)

Microstructure and mechanical properties of an Al/SiCp composite cold die forged gear
由: He, W., et al.
出版: (2014)

Surface morphology of single crystal CuAlNi shape memory alloy
由: Wu, Jing Ai.
出版: (2008)

Mechanical properties of cast aluminium alloy 6061-albite particulate composites
由: Seah, K.H.W., et al.
出版: (2014)

Application of AlMgGaLi foil for joining copper to SiCp/Al-MMCs for high-temperature and high-power electronics
由: Chen, Biqiang, et al.
出版: (2021)

Simulation of high strain rate behaviour of aluminium alloy AL6061-T6 under dynamic compression loading
由: Lim, Jian Li.
出版: (2011)

Microstructure analysis of magnesium alloy and/or its nanocomposite under high strain rate testing
由: Tan, Valerie Ying Jia
出版: (2022)

Ni(Pt) alloy silicidation on (100) Si and poly-silicon lines
由: Pey, Kin Leong, et al.
出版: (2013)

Band alignment of HfAlO/GaN (0001) determined by X-ray photoelectron spectroscopy : effect of in situ SiH4 passivation
由: Liu, Xinke, et al.
出版: (2015)

Al-Cr-Fe quasicrystals and their applications as reinforcements in the Ti based metal matrix composites
由: Li, Ruitao
出版: (2015)

Scanning Electro-Microscopy (SEM) of light magnesium alloy AZ31B on strain rate effect
由: Muhammad Syamil Shamsuri.
出版: (2013)

Wetting behavior of SnO-ZnO-P₂O₅-SiO₂ glass on 60 vol% SiCₚ/Al composites and characterization of the interfacial phases
由: Guo, Wei, et al.
出版: (2022)

Fabrication of Al-4.5Cu/15SiCp composites: I. Processing using mechanical alloying
由: Liu, Y.B., et al.
出版: (2014)

Analysis of precipitation hardening of 6061/10% SiC composite by differential scanning calorimetry
由: Lu, L., et al.
出版: (2014)

Wear behaviour of SiCp-reinforced magnesium matrix composites
由: Lim, C.Y.H., et al.
出版: (2014)

Fracture and fatigue of magnesium alloys and composites
由: Maw Aung.
出版: (2008)

Soldering alloys : composition, microstructure and joint characteristics
由: Ang, Edwin Hui Jun
出版: (2010)

Scanning Electron-Microscopy (SEM) of lightweight alloys
由: Tan, Wei Jian
出版: (2022)

An experimental and simulation study on build thickness dependent microstructure for electron beam melted Ti-6Al-4V
由: Tan, Xipeng, et al.
出版: (2015)

Microstructure and Properties of Semi-Solid Al Alloy 7075 after Heat Treatment
由: Narissara Mahathaninwong
出版: (2013)

Joining of magnesium alloys
由: Long, Tianzhong.
出版: (2008)

Feasibility and Reliability of Laser Powder Bed Fused AlSi10Mg/Wrought AA6061 Hybrid Aluminium Alloy Component
由: Zhao, Cuiling, et al.
出版: (2022)

Creep behaviour of metal matrix composites and alloys for high temperature service
由: Yang, Rong
出版: (2008)

Scanning electro-microscopy of alloys
由: Yong, Jovi Min
出版: (2019)

Study of corrosion in magnesium alloys
由: Naing Naing Aung
出版: (2008)

Mechanochemical effect on the microstructure and mechanical properties in ultraprecision machining of AA6061 alloy
由: Zhang, Jiayi, et al.
出版: (2021)

Additive manufacturing of austenitic alloys with high strength and high ductility by selective laser melting
由: Sun, Zhongji
出版: (2020)

Laser welding of ultralight magnesium alloy
由: Tang, Wee Min.
出版: (2009)

Micromechanisms of failures in ultralight magnesium alloys
由: Mark, Chee Kong
出版: (2010)

Deformation and fracture of Titanium and Aluminium alloys
由: Chew, Kia Guan.
出版: (2008)

Combined mode fracture of three aluminium alloys
由: Oruganti Rajmohan Kashyap
出版: (2008)

Modeling and numerical simulations of shape memory alloys
由: Gao, Xiangyang
出版: (2008)

The use of powder metallurgy routes for manufacturing aluminium alloy 6061 and aluminium alloy 6061 Based matrix - sic. Composites
由: Perpustakaan UGM, i-lib
出版: (1997)

Improving surface integrity of cold sprayed Ti-6Al-4V coating on Ti-6Al-4V substrate using mechanical post-peening
由: Tan, Yong Kang
出版: (2021)