Modeling of solid oxide fuel cell - gas turbine hybrid power plant

Modeling of solid oxide fuel cell - gas turbine hybrid power plant

The aim of this project is to develop a complete and flexible model for an integrated fuel cell/gas turbine system, and describe the operation characteristics of the hybrid system; the results then enable investigations and studies to be made on proposed configurations and designs. A general mathema...

Saved in:

書目詳細資料
主要作者:	Tian, Yun.
其他作者:	Chan, Siew Hwa
格式:	Theses and Dissertations
出版:	2008
主題:	DRNTU::Engineering::Mechanical engineering::Alternative, renewable energy sources
在線閱讀:	http://hdl.handle.net/10356/6543
標簽:	添加標簽沒有標簽, 成為第一個標記此記錄!
機構:	Nanyang Technological University

相似書籍

Energy and exergy analysis of solid oxide fuel cell power system
由: Ding, Ovi Lian
出版: (2008)

Development of solid oxide fuel/electrolyser cell stack
由: Wijaya, Virvandy
出版: (2015)

Investigation of electrochemical mechanisms of solid oxide fuel cells
由: Chen, Xiaojun.
出版: (2008)

Solid oxide fuel cells based on nano-structured electrodes
由: Tan, Han Siang.
出版: (2010)

Development of sulfur tolerant anode for solid oxide fuel cells
由: Bek, Yong Joo.
出版: (2009)

A mechanistic investigation of fuel oxidation reactions on the solid oxide fuel cell electrodes by using palladium catalyst nanoparticles
由: Alireza Babaei
出版: (2011)

Development of solid oxide fuel cell components by tape casting methods
由: Pang, Pei Song
出版: (2009)

Fabrication of solid oxide fuel cell components by tape casting method
由: Zhou, Weixiu.
出版: (2010)

Preparation and characterization of apatite/cathode interfaces of solid oxide fuel cells
由: Heah, Min An.
出版: (2009)

Development of computational models to optimise solid oxide fuel cell design
由: Xia, Zetao
出版: (2008)

Development of cathode materials for intermediate temperature solid oxide fuel cells
由: Wang, Wei
出版: (2011)

Material requirement and selection for intermediate temperature solid oxide fuel cells (IT-SOFC)
由: Subbarao Satish.
出版: (2008)

Thermodynamic modelling of a combined-cycle fuel cell power plant
由: Hu, Bo.
出版: (2008)

Fabrication and characterization of high-performance cathodes for intermediate temperature solid oxide fuel cells
由: Wang, Wei.
出版: (2008)

Study of nickel/gadolinia-doped ceria cermet anodes for solid oxide fuel cell
由: Yan, Ming Yan
出版: (2008)

High-performance gadolinia-doped ceria-based intermediate-temperature solid oxide fuel cells
由: Liu, Qinglin
出版: (2008)

Investigation on interaction reaction mechanism between metallic interconnect and electrodes in solid oxide fuel cell
由: Zhen, Yongda
出版: (2008)

Synthesis of oxide mixtures of fuel cell
由: Goh, Chin Foo.
出版: (2008)

Water-gas shift assisted autothermal fuel reforming
由: Ding, Ovi Lian
出版: (2008)

Development of a low cost micro fuel cell complete with power conversion
由: Lim, Vincent Ronggui.
出版: (2009)

Process development for laser-based additive manufacturing of solid oxide fuel cells
由: Tan, Kenneth Hong Yi
出版: (2019)

Fabrication and characterization of symmetrically tubular LSCM-based composite solid oxide electrolyzer cell
由: Chiam, Dean Tee Eng
出版: (2019)

Parameter design and energy management of a fuel cell electric vehicle
由: Chua, Manfred James Tze Kiat
出版: (2021)

Experimental and theoretical investigation of fuel reforming for fuel cell applications
由: Wang, Hongmin
出版: (2008)

Hydrodynamic performance optimization of horizontal Pinwheel and vertical Savonius tidal turbines using CFD
由: Mittal, Shivansh
出版: (2023)

Proton exchange membrane fuel cell measurement condition optimization and effects of different key materials
由: Tan, Joanne Yan Hui
出版: (2020)

Developement of passive liquid fuel cell
由: Lee, Heng Yih.
出版: (2012)

Conductive thermoplastics for micro fuel cells
由: Chen, Ziwei.
出版: (2009)

Effect of cathode/ anode area ratio on the electrochemical measurements of anode-supported solid oxide fuel cells
由: Tan, Gerald Wei Quan.
出版: (2011)

Savonius vertical axis wind turbine (VAWT)
由: Chen, Zhengnian.
出版: (2012)

Design and anlaysis of a tidal current turbine
由: Zhang, Bujie
出版: (2009)

Optimal and robust design of materials for wind turbine
由: Rashedi A M Mabrur Ahmad
出版: (2014)

Development of conductive polymer for micro fuel cells
由: Lee, Kam Hoong.
出版: (2011)

Development and testing of air breathing fuel cell
由: Sim, Nicholas Jian Hao.
出版: (2011)

Development of an energy pack for portable fuel cells
由: Tan, Charles Zhi Yong.
出版: (2011)

Design and analysis of a vertical axis wind turbine
由: Koh, Jian Hao.
出版: (2011)

Modelling and control for structural load mitigation of wind turbines
由: Girsang, Irving Paul
出版: (2016)

Simulation and modeling of polymer electrolyte membrane fuel cell
由: Cheng, Kelvin Yeo Boon.
出版: (2009)

Alternative fuels for transportation
由: Wai, Phone Aung
出版: (2010)

Modeling of a complete proton exchange membrane fuel cell
由: Tun Win Aung.
出版: (2008)