Process development for in-machine (CNC) polishing of blades
The student was attached to Delcam for 6 months for an industrial development project. This thesis describes in detail the work done for process development for blade polishing by adaptive machining methods. A brief introduction including literature review, project scope and objective were outlin...
Saved in:
| Main Author: | |
|---|---|
| Other Authors: | |
| Format: | Theses and Dissertations |
| Language: | English |
| Published: |
2016
|
| Subjects: | |
| Online Access: | http://hdl.handle.net/10356/68804 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Institution: | Nanyang Technological University |
| Language: | English |
| Summary: | The student was attached to Delcam for 6 months for an industrial development
project. This thesis describes in detail the work done for process development for
blade polishing by adaptive machining methods. A brief introduction including
literature review, project scope and objective were outlined initially. Next, it
highlighted the methods and process used as well as the materials, machine and
software. Experiments including machining, polishing and data collection were
carried out by fixing and varying different process parameters such as the feed rate,
spindle speed. Analysis was carried out from the data collected and an optimal set
of parameter is obtained. Finally, discussion and conclusion were presented and
future development was raised. The project explores an alternative method to blade
polishing by means of using abrasive discs operated by Computer Numerical
Control (CNC) machine. |
|---|