Hydrostatic extrusion-drawing of fine wire
Hydrostatic extrusion is a possible alternative method of producing fine wires. This report describes mainly the experimental machine that has been design and built at NTI to test this process. The machine is designed for semi-continuous extrusion at a very high pressure of 960 MPa (9500 bars). The...
Saved in:
| Main Author: | |
|---|---|
| Other Authors: | |
| Format: | Research Report |
| Published: |
2008
|
| Subjects: | |
| Online Access: | http://hdl.handle.net/10356/6911 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Institution: | Nanyang Technological University |
| id |
sg-ntu-dr.10356-6911 |
|---|---|
| record_format |
dspace |
| spelling |
sg-ntu-dr.10356-69112023-03-04T18:07:08Z Hydrostatic extrusion-drawing of fine wire Cheung, John S. T. Cheung Shing Tai, John School of Mechanical and Production Engineering DRNTU::Engineering::Manufacturing::Product engineering Hydrostatic extrusion is a possible alternative method of producing fine wires. This report describes mainly the experimental machine that has been design and built at NTI to test this process. The machine is designed for semi-continuous extrusion at a very high pressure of 960 MPa (9500 bars). The 25 mm diameter pressure chamber has a shrink-fit duplex construction. Pressure is generated throught two stages of intensification from normal shop air. RP 21/85 2008-09-17T14:36:50Z 2008-09-17T14:36:50Z 1988 1988 Research Report http://hdl.handle.net/10356/6911 Nanyang Technological University application/pdf |
| institution |
Nanyang Technological University |
| building |
NTU Library |
| continent |
Asia |
| country |
Singapore Singapore |
| content_provider |
NTU Library |
| collection |
DR-NTU |
| topic |
DRNTU::Engineering::Manufacturing::Product engineering |
| spellingShingle |
DRNTU::Engineering::Manufacturing::Product engineering Cheung, John S. T. Hydrostatic extrusion-drawing of fine wire |
| description |
Hydrostatic extrusion is a possible alternative method of producing fine wires. This report describes mainly the experimental machine that has been design and built at NTI to test this process. The machine is designed for semi-continuous extrusion at a very high pressure of 960 MPa (9500 bars). The 25 mm diameter pressure chamber has a shrink-fit duplex construction. Pressure is generated throught two stages of intensification from normal shop air. |
| author2 |
Cheung Shing Tai, John |
| author_facet |
Cheung Shing Tai, John Cheung, John S. T. |
| format |
Research Report |
| author |
Cheung, John S. T. |
| author_sort |
Cheung, John S. T. |
| title |
Hydrostatic extrusion-drawing of fine wire |
| title_short |
Hydrostatic extrusion-drawing of fine wire |
| title_full |
Hydrostatic extrusion-drawing of fine wire |
| title_fullStr |
Hydrostatic extrusion-drawing of fine wire |
| title_full_unstemmed |
Hydrostatic extrusion-drawing of fine wire |
| title_sort |
hydrostatic extrusion-drawing of fine wire |
| publishDate |
2008 |
| url |
http://hdl.handle.net/10356/6911 |
| _version_ |
1759854465196752896 |