Power amplifier design for next generation WLAN

To meet the demand of achieving a multi-Gbps data-rate for the next-generation wireless local area network (WLAN), the 60GHz frequency band is now being explored as a complementary to the existing 2.4GHz and 5GHz frequency bands for WLAN. To take advantages of the high data-rate at 60GHz and the lon...

Full description

Saved in:
Bibliographic Details
Main Author: Ye, Wanxin
Other Authors: Yeo Kiat Seng
Format: Theses and Dissertations
Language:English
Published: 2017
Subjects:
Online Access:http://hdl.handle.net/10356/69686
Tags: Add Tag
No Tags, Be the first to tag this record!
Institution: Nanyang Technological University
Language: English
id sg-ntu-dr.10356-69686
record_format dspace
spelling sg-ntu-dr.10356-696862023-07-04T17:33:25Z Power amplifier design for next generation WLAN Ye, Wanxin Yeo Kiat Seng School of Electrical and Electronic Engineering DRNTU::Engineering::Electrical and electronic engineering To meet the demand of achieving a multi-Gbps data-rate for the next-generation wireless local area network (WLAN), the 60GHz frequency band is now being explored as a complementary to the existing 2.4GHz and 5GHz frequency bands for WLAN. To take advantages of the high data-rate at 60GHz and the long communication distance at 2.4GHz and 5GHz, transceivers for the next generation WLAN are required to support all of the three frequency bands. As a block which is critical to the communication distance, data-rate and power consumption of a RF system, power amplifiers (PAs) are very important and challenging to design for the next generation of WLAN. For the 2.4GHz and the 5GHz bands which have long been used for WLAN, reported PAs have all been designed separately for each band to optimize the performance. To reduce the circuit area and simplify the RF system for the next generation WLAN, a wideband PA with a bandwidth of 2 to 6GHz is designed in this thesis so that both of these two frequency bands can be supported by one PA. By using a technique to design output matching networks for both the fundamental and 2nd harmonic of Class-AB PAs with bandwidth larger than one octave, the designed PA demonstrates a maximum power-added efficiency (PAE) of 28.4% and an overall PAE above 19% in the entire bandwidth, which is comparable to the PAE of reported WLAN PAs designed separately for the 2.4GHz and the 5GHz bands. When compared to a counterpart without matching for 2nd harmonic, the PA shows a maximum improvement of saturated output power (PSAT) and PAE by 1.9dB and 7.5% respectively. From 2 to 6GHz, the PA is capable of delivering an output power of 11.12-13.24dBm with EVM=-28dB for 11n formatted signals with 64QAM modulation, and 9.31-11.31dBm with EVM=-32dB for 11ac format signal with 256QAM modulation. For the newly introduced 60GHz frequency band, a big challenge of PA design is to maintain good power performance in the large bandwidth of 57 to 66GHz. To address this challenge, it is analyzed in this thesis that both the inter-stage matching network and the output matching network of a mm-wave PA need to be designed with small mismatch in the entire operating bandwidth. For this purpose, the matching equations of transformer-based matching networks (TMNs) are derived, based on which a method to synthesize TMN is proposed and applied to a 60GHz PA designed for the 802.11ad application. Implemented in a 65nm bulk CMOS technology, the PA achieves smaller degradation of power performance even compared to reported works in more advanced CMOS technologies. From 57 to 66GHz, the PA is measured with PSAT of 13.94 to 14.35dBm, P1dB of 10.81 to 11.68dBm, and peak PAE of 18.9% to 21.1%. With an EVM of 8.91%, the PA is capable of delivering 16QAM modulated signal with an output power larger than 10.8dBm and PAE higher than 10.1% in all the 4 channels of 802.11ad. Doctor of Philosophy (EEE) 2017-03-20T01:57:43Z 2017-03-20T01:57:43Z 2017 Thesis Ye, W. (2017). Power amplifier design for next generation WLAN. Doctoral thesis, Nanyang Technological University, Singapore. http://hdl.handle.net/10356/69686 10.32657/10356/69686 en 136 p. application/pdf
institution Nanyang Technological University
building NTU Library
continent Asia
country Singapore
Singapore
content_provider NTU Library
collection DR-NTU
language English
topic DRNTU::Engineering::Electrical and electronic engineering
spellingShingle DRNTU::Engineering::Electrical and electronic engineering
Ye, Wanxin
Power amplifier design for next generation WLAN
description To meet the demand of achieving a multi-Gbps data-rate for the next-generation wireless local area network (WLAN), the 60GHz frequency band is now being explored as a complementary to the existing 2.4GHz and 5GHz frequency bands for WLAN. To take advantages of the high data-rate at 60GHz and the long communication distance at 2.4GHz and 5GHz, transceivers for the next generation WLAN are required to support all of the three frequency bands. As a block which is critical to the communication distance, data-rate and power consumption of a RF system, power amplifiers (PAs) are very important and challenging to design for the next generation of WLAN. For the 2.4GHz and the 5GHz bands which have long been used for WLAN, reported PAs have all been designed separately for each band to optimize the performance. To reduce the circuit area and simplify the RF system for the next generation WLAN, a wideband PA with a bandwidth of 2 to 6GHz is designed in this thesis so that both of these two frequency bands can be supported by one PA. By using a technique to design output matching networks for both the fundamental and 2nd harmonic of Class-AB PAs with bandwidth larger than one octave, the designed PA demonstrates a maximum power-added efficiency (PAE) of 28.4% and an overall PAE above 19% in the entire bandwidth, which is comparable to the PAE of reported WLAN PAs designed separately for the 2.4GHz and the 5GHz bands. When compared to a counterpart without matching for 2nd harmonic, the PA shows a maximum improvement of saturated output power (PSAT) and PAE by 1.9dB and 7.5% respectively. From 2 to 6GHz, the PA is capable of delivering an output power of 11.12-13.24dBm with EVM=-28dB for 11n formatted signals with 64QAM modulation, and 9.31-11.31dBm with EVM=-32dB for 11ac format signal with 256QAM modulation. For the newly introduced 60GHz frequency band, a big challenge of PA design is to maintain good power performance in the large bandwidth of 57 to 66GHz. To address this challenge, it is analyzed in this thesis that both the inter-stage matching network and the output matching network of a mm-wave PA need to be designed with small mismatch in the entire operating bandwidth. For this purpose, the matching equations of transformer-based matching networks (TMNs) are derived, based on which a method to synthesize TMN is proposed and applied to a 60GHz PA designed for the 802.11ad application. Implemented in a 65nm bulk CMOS technology, the PA achieves smaller degradation of power performance even compared to reported works in more advanced CMOS technologies. From 57 to 66GHz, the PA is measured with PSAT of 13.94 to 14.35dBm, P1dB of 10.81 to 11.68dBm, and peak PAE of 18.9% to 21.1%. With an EVM of 8.91%, the PA is capable of delivering 16QAM modulated signal with an output power larger than 10.8dBm and PAE higher than 10.1% in all the 4 channels of 802.11ad.
author2 Yeo Kiat Seng
author_facet Yeo Kiat Seng
Ye, Wanxin
format Theses and Dissertations
author Ye, Wanxin
author_sort Ye, Wanxin
title Power amplifier design for next generation WLAN
title_short Power amplifier design for next generation WLAN
title_full Power amplifier design for next generation WLAN
title_fullStr Power amplifier design for next generation WLAN
title_full_unstemmed Power amplifier design for next generation WLAN
title_sort power amplifier design for next generation wlan
publishDate 2017
url http://hdl.handle.net/10356/69686
_version_ 1772828227788603392