Design of a conformal end-fire antenna
This report present a design of a conformal antenna with end-fire radiation. The design is based on low profile log-periodic monopole array antenna which are vertically polarized. It consists of 21 elements and a microstrip feeding line which provides a 180⁰ phase shift between each element. The...
محفوظ في:
المؤلف الرئيسي: | |
---|---|
مؤلفون آخرون: | |
التنسيق: | Final Year Project |
اللغة: | English |
منشور في: |
2017
|
الموضوعات: | |
الوصول للمادة أونلاين: | http://hdl.handle.net/10356/71777 |
الوسوم: |
إضافة وسم
لا توجد وسوم, كن أول من يضع وسما على هذه التسجيلة!
|
المؤسسة: | Nanyang Technological University |
اللغة: | English |
الملخص: | This report present a design of a conformal antenna with end-fire radiation. The design is
based on low profile log-periodic monopole array antenna which are vertically polarized.
It consists of 21 elements and a microstrip feeding line which provides a 180⁰ phase shift
between each element. The monopoles antennas have a variation in height for the high
frequency region while the middle frequency region has monopole antennas of the same
height but loaded with top hat of different sizes to achieve the required resonant
frequencies. At the low frequency region, the design is like the middle frequency region
but each top-hat is folded. A wideband transmission is provided from a coaxial line to the
microstrip line designed for the antenna feed providing an inter-element of 180⁰ phase
shift. A prototype has been designed and tested through simulation. Simulation results
show that an impedance bandwidth from 2 to 18 GHz (9:1) for VSWR < 2.1 and a gain
better than 8dBi over the same operating frequency. |
---|