Development of FTO inverse opal structural-based photoanodes for photoelectrochemical water splitting applications

To sustain the increasing demand for energy, solar energy has been identified as a great renewable and clean energy source. However, since solar energy is inconsistent due to geological differences, photoelectrochemical (PEC) water splitting were introduced to split water molecules into hydrogen and...

Full description

Saved in:
Bibliographic Details
Main Author: Ng, Shi Yun
Other Authors: Alfred Tok Iing Yoong
Format: Final Year Project
Language:English
Published: 2019
Subjects:
Online Access:http://hdl.handle.net/10356/76742
Tags: Add Tag
No Tags, Be the first to tag this record!
Institution: Nanyang Technological University
Language: English
id sg-ntu-dr.10356-76742
record_format dspace
spelling sg-ntu-dr.10356-767422023-03-04T15:43:26Z Development of FTO inverse opal structural-based photoanodes for photoelectrochemical water splitting applications Ng, Shi Yun Alfred Tok Iing Yoong School of Materials Science and Engineering DRNTU::Engineering::Materials To sustain the increasing demand for energy, solar energy has been identified as a great renewable and clean energy source. However, since solar energy is inconsistent due to geological differences, photoelectrochemical (PEC) water splitting were introduced to split water molecules into hydrogen and oxygen via the absorption of sunlight, where the former is stored as chemical fuels that can be transported or used upon demand. In this study, to improve the PEC efficiencies, Fluorinated Tin Oxide inverse opal (FTO-IO) structures were used as the three-dimensional conductive skeleton for the loading of secondary materials. FTO-IO structural-based photoanodes were fabricated in this study with Cadmium Sulfide (CdS) nanorods and Zinc Indium Sulfide (ZIS) nanosheets deposited onto the conductive backbone respectively. The PEC performances of these photoanodes were measured with a three-electrode system and the results obtained were compared against photoanodes that were synthesised on FTO substrate using the same secondary materials. At a potential of 0.8 V versus Reversible Hydrogen Electrode (RHE), photocurrent densities of FTO-IO/CdS-NR shot up from 0 mA/cm2 to 5.9 mA/cm2 and FTO-IO/ZIS-NS yielded an increment of 0.25 mA/cm2 to 1.15 mA/cm2 under AM 1.5 G light illumination. Both photocurrents showed tremendous improvement as compared to those achieved with FTO glass, which was around three and five times higher respectively. These enhancements can be attributed to the excellent charge collection ability and multiple light scattering of FTO-IO structure. To achieve better PEC efficiencies, other works such as heterojunction engineering can be performed. Bachelor of Engineering (Materials Engineering) 2019-04-08T07:43:26Z 2019-04-08T07:43:26Z 2019 Final Year Project (FYP) http://hdl.handle.net/10356/76742 en Nanyang Technological University 44 p. application/pdf
institution Nanyang Technological University
building NTU Library
continent Asia
country Singapore
Singapore
content_provider NTU Library
collection DR-NTU
language English
topic DRNTU::Engineering::Materials
spellingShingle DRNTU::Engineering::Materials
Ng, Shi Yun
Development of FTO inverse opal structural-based photoanodes for photoelectrochemical water splitting applications
description To sustain the increasing demand for energy, solar energy has been identified as a great renewable and clean energy source. However, since solar energy is inconsistent due to geological differences, photoelectrochemical (PEC) water splitting were introduced to split water molecules into hydrogen and oxygen via the absorption of sunlight, where the former is stored as chemical fuels that can be transported or used upon demand. In this study, to improve the PEC efficiencies, Fluorinated Tin Oxide inverse opal (FTO-IO) structures were used as the three-dimensional conductive skeleton for the loading of secondary materials. FTO-IO structural-based photoanodes were fabricated in this study with Cadmium Sulfide (CdS) nanorods and Zinc Indium Sulfide (ZIS) nanosheets deposited onto the conductive backbone respectively. The PEC performances of these photoanodes were measured with a three-electrode system and the results obtained were compared against photoanodes that were synthesised on FTO substrate using the same secondary materials. At a potential of 0.8 V versus Reversible Hydrogen Electrode (RHE), photocurrent densities of FTO-IO/CdS-NR shot up from 0 mA/cm2 to 5.9 mA/cm2 and FTO-IO/ZIS-NS yielded an increment of 0.25 mA/cm2 to 1.15 mA/cm2 under AM 1.5 G light illumination. Both photocurrents showed tremendous improvement as compared to those achieved with FTO glass, which was around three and five times higher respectively. These enhancements can be attributed to the excellent charge collection ability and multiple light scattering of FTO-IO structure. To achieve better PEC efficiencies, other works such as heterojunction engineering can be performed.
author2 Alfred Tok Iing Yoong
author_facet Alfred Tok Iing Yoong
Ng, Shi Yun
format Final Year Project
author Ng, Shi Yun
author_sort Ng, Shi Yun
title Development of FTO inverse opal structural-based photoanodes for photoelectrochemical water splitting applications
title_short Development of FTO inverse opal structural-based photoanodes for photoelectrochemical water splitting applications
title_full Development of FTO inverse opal structural-based photoanodes for photoelectrochemical water splitting applications
title_fullStr Development of FTO inverse opal structural-based photoanodes for photoelectrochemical water splitting applications
title_full_unstemmed Development of FTO inverse opal structural-based photoanodes for photoelectrochemical water splitting applications
title_sort development of fto inverse opal structural-based photoanodes for photoelectrochemical water splitting applications
publishDate 2019
url http://hdl.handle.net/10356/76742
_version_ 1759856995851042816