Voltage dip mitigation in distribution networks
In this era of rapidly growing industries, power systems are facing many new challenges, especially the distribution side. Many semiconductor industries including wafer manufacturing are in need of high quality power and the fluctuation in voltage is a major concern for them. Voltage dip and volt...
Saved in:
Main Author: | |
---|---|
Other Authors: | |
Format: | Theses and Dissertations |
Language: | English |
Published: |
2019
|
Subjects: | |
Online Access: | http://hdl.handle.net/10356/78625 |
Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
Institution: | Nanyang Technological University |
Language: | English |
Summary: | In this era of rapidly growing industries, power systems are facing many new challenges,
especially the distribution side. Many semiconductor industries including wafer
manufacturing are in need of high quality power and the fluctuation in voltage is a major
concern for them. Voltage dip and voltage swell can lead to failure or malfunction of
critical equipment leading to both operation and financial losses for the customers. Both
voltage dip and voltage swell cannot be eliminated from the power system since system
faults, weather and disturbances are stochastic in nature. However, they can be mitigated.
Mitigation of voltage dip is possible by injecting either a shunt current or a series voltage.
At present, integration of renewable energy sources in the grid is also a major concern
because existing power system was not built to accommodate the renewable sources. By
integrating, there is a large voltage dip or swell occurred.
Our major concern in this project is the voltage dip. Different test cases for voltage dip
condition such as large magnitude and short duration, large magnitude and long duration,
small magnitude and short duration, and small magnitude and long duration will be
studied. In this project, both balanced and unbalanced voltage dips caused by short circuit
faults will be simulated for different operating conditions in a distribution network using
MATLAB/Simulink and effective voltage dip mitigation method (mainly STATCOM)
will be explored and implemented. Modeling of the STATCOM and its MATLAB results
will be discussed in detail. The changes in voltage will be demonstrated before and after
STATCOM. This will help reduce the negative impact and avoid equipment failure on a
very large scale. |
---|