Selective Laser Melting Of Spodumene: An Exploratory Study

Selective Laser Melting Of Spodumene: An Exploratory Study

Selective laser melting of a raw mineral – spodumene, was studied in an effort to expand the range of usable material for the SLM process. Single layer parametric tests were conducted varying the process parameters such as laser power, scan velocity, and hatch spacing. The results from this experime...

Saved in:

書目詳細資料
Main Authors:	Gan, Mingxuan, Wong, Chee How
其他作者:	School of Mechanical and Aerospace Engineering
格式:	Conference or Workshop Item
語言:	English
出版:	2016
主題:	Additive Manufacturing Selective laser melting
在線閱讀:	https://hdl.handle.net/10356/84422 http://hdl.handle.net/10220/41804
標簽:	添加標簽沒有標簽, 成為第一個標記此記錄!
機構:	Nanyang Technological University
語言:	English

相似書籍

Properties of selective laser melted spodumene glass-ceramic
由: Gan, Ming Xuan, et al.
出版: (2018)

Porosity formation in selective laser melting of spodumene
由: Gan, Ming Xuan, et al.
出版: (2018)

Microstructures and Texture of Inconel 718 Alloy Fabricated by Selective Laser Melting
由: Shuai, Li, et al.
出版: (2016)

On the study of keyhole-mode melting in selective laser melting process
由: Le, Kim Quy, et al.
出版: (2020)

Influence of the geometric factor for the width of the contour scan in selective laser melting
由: Ahn, Il Hyuk, et al.
出版: (2016)

Review Of The Fatigue Performance Of Stainless Steel 316L Parts Manufactured By Selective Laser Melting
由: Zhang, Meng, et al.
出版: (2016)

Discontinuity of overhanging melt track in selective laser melting process
由: Le, Kim Quy, et al.
出版: (2020)

SELECTIVE LASER MELTING OF HIGH PERFORMANCE FERROUS ALLOYS
由: TAN YONG HAO
出版: (2022)

A study on the influence of powder packing density on the melt track in the selective laser melting process
由: Le, Kim Quy, et al.
出版: (2018)

Mitigation of liquation cracking in selective laser melted Inconel 718 through optimization of layer thickness and laser energy density
由: Luu, Duy Nghia, et al.
出版: (2022)

On the corrosion resistance of some selective laser melted alloys
由: Suryawanshi, Jyoti, et al.
出版: (2021)

Study and modeling of melt pool evolution in selective laser melting process of SS316L
由: Tan, J. L., et al.
出版: (2019)

Tribological properties of selective laser melted Al–12Si alloy
由: Rathod, Hemant J., et al.
出版: (2021)

Spatter transport by inert gas flow in selective laser melting : a simulation study
由: Ahmad Bin Anwar, et al.
出版: (2020)

Selective laser melting of titanium alloy with 50 wt% tantalum : microstructure and mechanical properties
由: Sing, Swee Leong, et al.
出版: (2022)

Practical support structures for selective laser melting
由: Gan, Ming Xuan, et al.
出版: (2018)

Study of the spatter distribution on the powder bed during selective laser melting
由: Ahmad Bin Anwar, et al.
出版: (2019)

Investigation on the integral effects of process parameters on properties of selective laser melted stainless steel parts
由: Choong, Yu Ying Clarrisa, et al.
出版: (2018)

Effects of re-melting strategies on densification behavior and mechanical properties of selective laser melted AlSi10Mg parts
由: Chua, Chee Kai, et al.
出版: (2018)

Laser re-scanning strategy in selective laser melting for part quality enhancement : a review
由: Huang, Sheng, et al.
出版: (2018)

A thermo-mechanical coupling model for predicting temperature and residual stress fields in selective laser melting
由: Tan, Pengfei, et al.
出版: (2018)

Methods of residual stress reduction for metal parts manufactured using selective laser melting (a review)
由: Li, Hua, et al.
出版: (2018)

A Comparative Study on Selective Laser Melting and Electron Beam Melting Process for Orthopedic Implants
由: Khalid Rafi, Haludeen, et al.
出版: (2016)

Producing Hip Implants Of Titanium Alloys By Additive Manufacturing
由: Evgenii, Borisov, et al.
出版: (2016)

Initial Study of Selective Laser Melting of ZrO2/Al2O3 Ceramic
由: Zhao, Ziqiang, et al.
出版: (2016)

Effects of chamber oxygen concentration on microstructure and mechanical properties of stainless steel 316L parts by selective laser melting
由: Sun, Zhongji, et al.
出版: (2018)

A computational study on porosity evolution in parts produced by selective laser melting
由: Tan, Jie Lun, et al.
出版: (2019)

Characterisation of micro-lattices fabricated by selective laser melting
由: Wiria, Florencia Edith, et al.
出版: (2016)

Selective Laser Melting Of Aluminium Metal Matrix Composites
由: Sercombe, Timothy B., et al.
出版: (2016)

Processing of Dissimilar Metals in Selective Laser Melting
由: Sing, Swee Leong, et al.
出版: (2016)

A Numerical Study on the Melt Track in Selective Laser Melting Using Aluminium Alloy 6061
由: Sing, S. L., et al.
出版: (2016)

Additively-manufactured metallic porous lattice heat exchangers for air-side heat transfer enhancement
由: Ho, Jin Yao, et al.
出版: (2021)

Densifying method in additive manufacturing process of H13 tool steel : laser re-melting
由: Choe, Jungho, et al.
出版: (2018)

Fabrication of titanium based biphasic scaffold using selective laser melting and collagen immersion
由: Sing, Swee Leong, et al.
出版: (2018)

The Effect Of Laser Power And Scanning Speed On The Density Of Selective Laser Melting Fabricated AL-CNT Composites
由: Du, Zhenglin, et al.
出版: (2016)

Preliminary Investigation On Selective Laser Melting Of Pure Tin
由: Yap, Chor Yen, et al.
出版: (2016)

Influence of re-melting on surface roughness and porosity of AlSi10Mg parts fabricated by selective laser melting
由: Yu, Wenhui, et al.
出版: (2020)

Direct Manufacture of Non-Assembly Mechanism by Selective Laser Melting
由: Wang, Di, et al.
出版: (2016)

Selective Laser Melting: On the Study of Microstructure of K220
由: Zhang, Dan Qing, et al.
出版: (2016)

Thermal fluid modelling of selective laser melting
由: Tan, Jie Lun, et al.
出版: (2018)