Surface modification of additive manufactured components by ultrasonic cavitation abrasive finishing

Surface modification of additive manufactured components by ultrasonic cavitation abrasive finishing

Powder Bed Fusion (PBF) is a group of powder-bed based layered Additive Manufacturing (AM) techniques for direct fabrication of metal and metal alloys. Despite its advancements, the surface quality of as-built PBF components remains unsatisfactory. In this paper, a new post-process finishing techniq...

Saved in:

書目詳細資料
Main Authors:	Tan, Kai Liang, Yeo, Song Huat
其他作者:	School of Mechanical and Aerospace Engineering
格式:	Article
語言:	English
出版:	2017
主題:	Ultrasonic Cavitation Abrasive Finishing Additive Manufacturing
在線閱讀:	https://hdl.handle.net/10356/86841 http://hdl.handle.net/10220/44231
標簽:	添加標簽沒有標簽, 成為第一個標記此記錄!

相似書籍

Surface finishing on IN625 additively manufactured surfaces by combined ultrasonic cavitation and abrasion
由: Tan, Kheng Leong, et al.
出版: (2021)

Synergistic effects in hydrodynamic cavitation abrasive finishing for internal surface-finish enhancement of additive-manufactured components
由: Nagalingam, Arun Prasanth, et al.
出版: (2020)

Rotary ultrasonic-assisted abrasive flow finishing and its fundamental performance in Al6061 machining
由: Wang, Qiuyan, et al.
出版: (2022)

Enhancement of acoustic cavitation streaming: a study on surface finishing of additively manufactured components
由: Medya, Saikat, et al.
出版: (2024)

Developing high intensity ultrasonic cleaning (HIUC) for post-processing additively manufactured metal components
由: Tan, W. X., et al.
出版: (2022)

Experimental investigation on magnetic abrasive finishing for internal surfaces of waveguides produced by selective laser melting
由: Wang, Liaoyuan, et al.
出版: (2024)

Multiphase hydrodynamic flow finishing for surface integrity enhancement of additive manufactured internal channels
由: Nagalingam, Arun Prasanth, et al.
出版: (2020)

The manufacture of silicon carbide abrasive
由: Escobar, Arturo
出版: (1961)

Effects of ambient pressure and fluid temperature in ultrasonic cavitation machining
由: Nagalingam, Arun Prasanth, et al.
出版: (2020)

Experimental investigation into nano-finishing of β-TNTZ alloy using magnetorheological fluid magnetic abrasive finishing process for orthopedic applications
由: Prakash, Chander, et al.
出版: (2022)

Controlled hydrodynamic cavitation erosion with abrasive particles for internal surface modification of additive manufactured components
由: Nagalingam, Arun Prasanth, et al.
出版: (2020)

Electromagnetic acoustic transducer ultrasonic inspection of additive manufacturing samples
由: Zu Nurain Bin Mohamad Mudrika
出版: (2024)

A study on ultrasonic vibration cutting of low alloy steel
由: Nath, C., et al.
出版: (2014)

Ultrasonic cavitation abrasive finishing
由: Tan, Kai Liang
出版: (2019)

Surface quality and material removal in magnetic abrasive finishing of selective laser melted 316L stainless steel
由: Zhang, J., et al.
出版: (2020)

Magneto-rheological fluid assisted abrasive nanofinishing of ?-phase ti-nb-ta-zr alloy: Parametric appraisal and corrosion analysis
由: Singh, S., et al.
出版: (2021)

Experiments on the ultrasonic bonding additive manufacturing of metallic glass and crystalline metal composite
由: Li, G., et al.
出版: (2022)

Hydrodynamic cavitation abrasive finishing
由: Nagalingam, Arun Prasanth
出版: (2020)

A study of the production of silicon carbide abrasives from coke oven gas
由: Bautista, Carlos Chito S.
出版: (1972)

Multiphase hydrodynamic flow characterization for surface finishing the laser powder bed fused AlSi10Mg conformal cooling channels
由: Nagalingam, Arun Prasanth, et al.
出版: (2022)

A study to improve abrasion resistance of natural rubber
由: Chaiyaporn Pomchaitawat
出版: (2023)

Modelling and monitoring of abrasive finishing processes using artificial intelligence techniques : a review
由: Pandiyan, Vigneashwara, et al.
出版: (2020)

The manufacture of silicon carbide in its crude and finished forms
由: Diaz, Anastacio P., et al.
出版: (1979)

Surface roughness evaluation of additive manufactured components using fiberscopes
由: Seah, Benjamin Yan Hui
出版: (2024)

Impact-abrasion behavior of low alloy white cast irons
由: Ma, Q., et al.
出版: (2014)

A STUDY ON THE DEVELOPMENT OF MAGNETICALLY DRIVEN INTERNAL FINISHING TECHNIQUE
由: ZHANG JIONG
出版: (2021)

Evaluation of ultrasonic vibration cutting while machining inconel 718
由: Nath, C., et al.
出版: (2014)

3D Scanning Technique for Abrasion of Shoe Sole
由: Ong, Jaka
出版: (2017)

Effects of high frequency vibratory finishing of aerospace components
由: Wong, Ben Jin, et al.
出版: (2020)

Scratching of polymers-Modeling abrasive wear
由: Sinha, S.K., et al.
出版: (2014)

Non-destructive evaluation of wire arc additively manufactured samples with surface roughness
由: Wee, Adwin Hong Shiun
出版: (2024)

Abrasivity measurement of brittle rock after thermal treatment
由: Wang, Lu, et al.
出版: (2023)

Erosion threshold and surface roughness maps in hydrodynamic cavitation abrasive finishing process
由: Syaiful Kamaruzzaman Sa'adon
出版: (2020)

RF Components Based on Advanced Additive Technologies
由: Chartier, T., et al.
出版: (2016)

Electromagnetic acoustic transducer (EMAT) ultrasonic testing of AM samples
由: Goh, Jasmine Jin Hui
出版: (2024)

Process characteristics of surface finishing using viscoelastic abrasive laden media on industrial metals in non-contact ultrasonic finishing process
由: Chien Artadi, Myron Huihao
出版: (2019)

Wind Tunnel Testing Of A Joined-wing Aircraft Model With Additive Manufactured Components
由: Teo, Zhen Wei, et al.
出版: (2016)

Machinability study of tungsten carbide using PCD tools under ultrasonic elliptical vibration cutting
由: Nath, C., et al.
出版: (2014)

Wire electrical discharge polishing of additive manufactured metallic components
由: Boban, J., et al.
出版: (2021)

An analytical investigation of pad wear caused by the conditioner in fixed abrasive chemical–mechanical polishing
由: Nguyen, N. Y., et al.
出版: (2016)