The effect of crystallographic orientation on the deformation mechanisms of NiAl nanofilms under tension

• Main Authors: Krylova, Karina A., Babicheva, Rita I., Zhou, Kun, Bubenchikov, Alexey M., Ekomasov, Evgenii G., Dmitriev, Sergey V.
• Other Authors: School of Mechanical and Aerospace Engineering
• Format: Article
• Language: English
• Published: 2019
• Subjects: Crystallographic Orientation; Deformation Mechanism; Engineering::Mechanical engineering
• Online Access: https://hdl.handle.net/10356/87193; http://hdl.handle.net/10220/49877
• Institution: Nanyang Technological University

Molecular dynamics is applied to study the effect of crystallographic orientation on the plastic deformation mechanisms and mechanical properties of NiAl intermetallic nanofilms subjected to uniaxial tension. It is observed that the deformation mechanisms qualitatively depend on the crystallographic orientation of the nanofilms with respect to the loading direction. Plastic deformation of the nanofilms along [557] crystallographic direction is associated with the edge dislocation sliding in the slip system [001](110). As for the nanofilms stretched along [554] and [111] directions, their deformation occurs first through the dislocation sliding followed by the formation of (112)[11 1] twins. Uniaxial tension of the nanofilms along [559] and [55 11] leads to the nucleation and growth of a martensitic phase followed by their rupture along an interface. The maximum (minimum) strength of 9.9 (7.0) GPa is observed for the nanofilms stretched along the [559] ([554]) crystallographic direction, while the largest (smallest) strain to failure of 27 (15)% is for [559] ([55 11]). Various deformation mechanisms of the nanofilms are explained through computing the Schmid factor for the operational slip system. The results indicate that the crystallographic orientation is among the key parameters controlling the deformation mechanisms and mechanical properties of intermetallic nanofilms.