End-fire surface wave antenna with metasurface coating
This paper describes a wideband and low-profile end-fire surface wave antenna embedded into a large metallic platform. It consists of a tapered grounded slab fed by a wideband surface wave launcher and coated with a planar gradient metasurface (MS). It is found that by altering the surface reactance...
Saved in:
| Main Authors: | , |
|---|---|
| Other Authors: | |
| Format: | Article |
| Language: | English |
| Published: |
2018
|
| Subjects: | |
| Online Access: | https://hdl.handle.net/10356/87547 http://hdl.handle.net/10220/45453 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Institution: | Nanyang Technological University |
| Language: | English |
| Summary: | This paper describes a wideband and low-profile end-fire surface wave antenna embedded into a large metallic platform. It consists of a tapered grounded slab fed by a wideband surface wave launcher and coated with a planar gradient metasurface (MS). It is found that by altering the surface reactance of the MS array, the surface wave propagating in the grounded slab can be manipulated to suppress the radiation of TM1 mode region at a specific high frequency. A simple design procedure of MS array is then developed. In addition, a blind-filled cylinder hole is used to further improve the radiation pattern at certain high frequencies. A prototype of the proposed antenna is finally fabricated and tested. Measured results are in good agreement with simulated ones, and they show that the surface wave antenna has a very wide bandwidth from 3.78 to 18.54 GHz for voltage standing wave ratio <; 2.5 and exhibits a low profile of only 5 mm (0.063 λL, λL is the free-space wavelength at the lowest operating frequency). Good radiation pattern and high gain are achieved over a wide frequency band. |
|---|