Effects of re-melting strategies on densification behavior and mechanical properties of selective laser melted AlSi10Mg parts
Effects of re-melting strategy on densities and mechanical properties of AlSi10Mg samples fabricated by selective laser melting (SLM) were investigated. Strategies of same and opposite re-melting routines based on the alternative stripe scanning routine were performed. The densification behaviors...
Saved in:
Main Authors: | , , , |
---|---|
Other Authors: | |
Format: | Conference or Workshop Item |
Language: | English |
Published: |
2018
|
Subjects: | |
Online Access: | https://hdl.handle.net/10356/88696 http://hdl.handle.net/10220/45914 |
Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
Institution: | Nanyang Technological University |
Language: | English |
id |
sg-ntu-dr.10356-88696 |
---|---|
record_format |
dspace |
spelling |
sg-ntu-dr.10356-886962020-09-24T20:13:13Z Effects of re-melting strategies on densification behavior and mechanical properties of selective laser melted AlSi10Mg parts Chua, Chee Kai Tian, Xuelei Yu, Wenhui Sing, Swee Leong School of Mechanical and Aerospace Engineering Proceedings of the 3rd International Conference on Progress in Additive Manufacturing (Pro-AM 2018) Singapore Centre for 3D Printing Selective Laser Melting Additive Manufacturing DRNTU::Engineering::Mechanical engineering::Prototyping Effects of re-melting strategy on densities and mechanical properties of AlSi10Mg samples fabricated by selective laser melting (SLM) were investigated. Strategies of same and opposite re-melting routines based on the alternative stripe scanning routine were performed. The densification behaviors of the SLM manufactured AlSi10Mg samples with different strategies were characterized by a solid densitometer. Tensile strength and elongation were also measured and compared with the samples produced with simple stripe strategy. The results show that remelting strategies result in insignificant increase in the densification and slight decrease in ultimate tensile strength of the SLM components. However, great increase in elongation is obtained by remelting. Furthermore, the same or opposite directional re-melting scanning witnesses no significant difference in results. NRF (Natl Research Foundation, S’pore) Published version 2018-09-10T07:22:09Z 2019-12-06T17:09:03Z 2018-09-10T07:22:09Z 2019-12-06T17:09:03Z 2018 Conference Paper Yu, W., Sing, S. L., Tian, X., & Chua, C. K. (2018). Effects of re-melting strategies on densification behavior and mechanical properties of selective laser melted AlSi10Mg parts. Proceedings of the 3rd International Conference on Progress in Additive Manufacturing (Pro-AM 2018), 476-481. doi:10.25341/D48309 https://hdl.handle.net/10356/88696 http://hdl.handle.net/10220/45914 10.25341/D48309 en © 2018 Nanyang Technological University. Published by Nanyang Technological University, Singapore. 6 p. application/pdf |
institution |
Nanyang Technological University |
building |
NTU Library |
country |
Singapore |
collection |
DR-NTU |
language |
English |
topic |
Selective Laser Melting Additive Manufacturing DRNTU::Engineering::Mechanical engineering::Prototyping |
spellingShingle |
Selective Laser Melting Additive Manufacturing DRNTU::Engineering::Mechanical engineering::Prototyping Chua, Chee Kai Tian, Xuelei Yu, Wenhui Sing, Swee Leong Effects of re-melting strategies on densification behavior and mechanical properties of selective laser melted AlSi10Mg parts |
description |
Effects of re-melting strategy on densities and mechanical properties of AlSi10Mg
samples fabricated by selective laser melting (SLM) were investigated. Strategies of same and
opposite re-melting routines based on the alternative stripe scanning routine were performed. The
densification behaviors of the SLM manufactured AlSi10Mg samples with different strategies
were characterized by a solid densitometer. Tensile strength and elongation were also measured
and compared with the samples produced with simple stripe strategy. The results show that remelting strategies result in insignificant increase in the densification and slight decrease in ultimate tensile strength of the SLM components. However, great increase in elongation is obtained by remelting. Furthermore, the same or opposite directional re-melting scanning witnesses no
significant difference in results. |
author2 |
School of Mechanical and Aerospace Engineering |
author_facet |
School of Mechanical and Aerospace Engineering Chua, Chee Kai Tian, Xuelei Yu, Wenhui Sing, Swee Leong |
format |
Conference or Workshop Item |
author |
Chua, Chee Kai Tian, Xuelei Yu, Wenhui Sing, Swee Leong |
author_sort |
Chua, Chee Kai |
title |
Effects of re-melting strategies on densification behavior and mechanical properties of selective laser melted AlSi10Mg parts |
title_short |
Effects of re-melting strategies on densification behavior and mechanical properties of selective laser melted AlSi10Mg parts |
title_full |
Effects of re-melting strategies on densification behavior and mechanical properties of selective laser melted AlSi10Mg parts |
title_fullStr |
Effects of re-melting strategies on densification behavior and mechanical properties of selective laser melted AlSi10Mg parts |
title_full_unstemmed |
Effects of re-melting strategies on densification behavior and mechanical properties of selective laser melted AlSi10Mg parts |
title_sort |
effects of re-melting strategies on densification behavior and mechanical properties of selective laser melted alsi10mg parts |
publishDate |
2018 |
url |
https://hdl.handle.net/10356/88696 http://hdl.handle.net/10220/45914 |
_version_ |
1681058447242559488 |