Effects of re-melting strategies on densification behavior and mechanical properties of selective laser melted AlSi10Mg parts

Effects of re-melting strategies on densification behavior and mechanical properties of selective laser melted AlSi10Mg parts

Effects of re-melting strategy on densities and mechanical properties of AlSi10Mg samples fabricated by selective laser melting (SLM) were investigated. Strategies of same and opposite re-melting routines based on the alternative stripe scanning routine were performed. The densification behaviors...

Saved in:

書目詳細資料
Main Authors:	Chua, Chee Kai, Tian, Xuelei, Yu, Wenhui, Sing, Swee Leong
其他作者:	School of Mechanical and Aerospace Engineering
格式:	Conference or Workshop Item
語言:	English
出版:	2018
主題:	Selective Laser Melting Additive Manufacturing DRNTU::Engineering::Mechanical engineering::Prototyping
在線閱讀:	https://hdl.handle.net/10356/88696 http://hdl.handle.net/10220/45914
標簽:	添加標簽沒有標簽, 成為第一個標記此記錄!

相似書籍

Influence of re-melting on surface roughness and porosity of AlSi10Mg parts fabricated by selective laser melting
由: Yu, Wenhui, et al.
出版: (2020)

Laser re-scanning strategy in selective laser melting for part quality enhancement : a review
由: Huang, Sheng, et al.
出版: (2018)

Densifying method in additive manufacturing process of H13 tool steel : laser re-melting
由: Choe, Jungho, et al.
出版: (2018)

A study on the influence of powder packing density on the melt track in the selective laser melting process
由: Le, Kim Quy, et al.
出版: (2018)

Investigation on the integral effects of process parameters on properties of selective laser melted stainless steel parts
由: Choong, Yu Ying Clarrisa, et al.
出版: (2018)

Review Of The Fatigue Performance Of Stainless Steel 316L Parts Manufactured By Selective Laser Melting
由: Zhang, Meng, et al.
出版: (2016)

Methods of residual stress reduction for metal parts manufactured using selective laser melting (a review)
由: Li, Hua, et al.
出版: (2018)

Porosity formation in selective laser melting of spodumene
由: Gan, Ming Xuan, et al.
出版: (2018)

Selective Laser Melting Of Spodumene: An Exploratory Study
由: Gan, Mingxuan, et al.
出版: (2016)

Effects of chamber oxygen concentration on microstructure and mechanical properties of stainless steel 316L parts by selective laser melting
由: Sun, Zhongji, et al.
出版: (2018)

Microstructures and Texture of Inconel 718 Alloy Fabricated by Selective Laser Melting
由: Shuai, Li, et al.
出版: (2016)

Properties of selective laser melted spodumene glass-ceramic
由: Gan, Ming Xuan, et al.
出版: (2018)

Influence of the geometric factor for the width of the contour scan in selective laser melting
由: Ahn, Il Hyuk, et al.
出版: (2016)

SELECTIVE LASER MELTING OF HIGH PERFORMANCE FERROUS ALLOYS
由: TAN YONG HAO
出版: (2022)

A thermo-mechanical coupling model for predicting temperature and residual stress fields in selective laser melting
由: Tan, Pengfei, et al.
出版: (2018)

Novel method of residual stress reduction for AlSi10Mg manufactured using selective laser melting without compromise of mechanical strength
由: Lim, Chong Heng, et al.
出版: (2023)

A Comparative Study on Selective Laser Melting and Electron Beam Melting Process for Orthopedic Implants
由: Khalid Rafi, Haludeen, et al.
出版: (2016)

On the study of keyhole-mode melting in selective laser melting process
由: Le, Kim Quy, et al.
出版: (2020)

Discontinuity of overhanging melt track in selective laser melting process
由: Le, Kim Quy, et al.
出版: (2020)

Tribological properties of selective laser melted Al–12Si alloy
由: Rathod, Hemant J., et al.
出版: (2021)

Selective laser melting of titanium alloy with 50 wt% tantalum : microstructure and mechanical properties
由: Sing, Swee Leong, et al.
出版: (2022)

Characterisation of micro-lattices fabricated by selective laser melting
由: Wiria, Florencia Edith, et al.
出版: (2016)

Processing of Dissimilar Metals in Selective Laser Melting
由: Sing, Swee Leong, et al.
出版: (2016)

Thermal fluid modelling of selective laser melting
由: Tan, Jie Lun, et al.
出版: (2018)

A Numerical Study on the Melt Track in Selective Laser Melting Using Aluminium Alloy 6061
由: Sing, S. L., et al.
出版: (2016)

Study and modeling of melt pool evolution in selective laser melting process of SS316L
由: Tan, J. L., et al.
出版: (2019)

On the corrosion resistance of some selective laser melted alloys
由: Suryawanshi, Jyoti, et al.
出版: (2021)

Fabrication of titanium based biphasic scaffold using selective laser melting and collagen immersion
由: Sing, Swee Leong, et al.
出版: (2018)

Mitigation of liquation cracking in selective laser melted Inconel 718 through optimization of layer thickness and laser energy density
由: Luu, Duy Nghia, et al.
出版: (2022)

Process parameter optimization for additively manufactured stainless steel 316L parts by selective electron beam melting
由: Wang, Chengcheng, et al.
出版: (2018)

Spatter transport by inert gas flow in selective laser melting : a simulation study
由: Ahmad Bin Anwar, et al.
出版: (2020)

Initial Study of Selective Laser Melting of ZrO2/Al2O3 Ceramic
由: Zhao, Ziqiang, et al.
出版: (2016)

Selective Laser Melting Of Aluminium Metal Matrix Composites
由: Sercombe, Timothy B., et al.
出版: (2016)

An investigation of high temperature tensile properties of selective laser melted Ti-6AL-4V
由: Baitimerov, R. M., et al.
出版: (2018)

Influences of scanning speed on selective laser melting : a computational study
由: Tang, Chao, et al.
出版: (2018)

Study of the spatter distribution on the powder bed during selective laser melting
由: Ahmad Bin Anwar, et al.
出版: (2019)

A computational study on porosity evolution in parts produced by selective laser melting
由: Tan, Jie Lun, et al.
出版: (2019)

Practical support structures for selective laser melting
由: Gan, Ming Xuan, et al.
出版: (2018)

Investigation of the effects on the print location during selective laser melting process
由: Chua, Gregory Kok Hong, et al.
出版: (2018)

Preliminary Investigation On Selective Laser Melting Of Pure Tin
由: Yap, Chor Yen, et al.
出版: (2016)