A weak-inversion low-power active mixer for 2.4 GHz ISM band applications

This work describes a fully integrated active mixer designed in 0.18µm CMOS technology for 2.4 GHz Industrial, Scientific and Medical (ISM) band applications. The mixer uses a source driven local oscillator (LO) to integrate the RF-LO buffering with the active mixer, and weakly inverted input MOSFET...

Full description

Saved in:

Bibliographic Details
Main Authors:	Boon, Chirn Chye, Do, Manh Anh, Yeo, Kiat Seng, Cabuk, Alper, Do, Aaron V.
Other Authors:	School of Electrical and Electronic Engineering
Format:	Article
Language:	English
Published:	2010
Subjects:	DRNTU::Engineering::Electrical and electronic engineering::Antennas, wave guides, microwaves, radar, radio
Online Access:	https://hdl.handle.net/10356/90519 http://hdl.handle.net/10220/6233
Tags:	Add Tag No Tags, Be the first to tag this record!
Institution:	Nanyang Technological University
Language:	English

id	sg-ntu-dr.10356-90519
record_format	dspace
spelling	sg-ntu-dr.10356-905192020-03-07T13:57:30Z A weak-inversion low-power active mixer for 2.4 GHz ISM band applications Boon, Chirn Chye Do, Manh Anh Yeo, Kiat Seng Cabuk, Alper Do, Aaron V. School of Electrical and Electronic Engineering DRNTU::Engineering::Electrical and electronic engineering::Antennas, wave guides, microwaves, radar, radio This work describes a fully integrated active mixer designed in 0.18µm CMOS technology for 2.4 GHz Industrial, Scientific and Medical (ISM) band applications. The mixer uses a source driven local oscillator (LO) to integrate the RF-LO buffering with the active mixer, and weakly inverted input MOSFETs to improve the gain and noise performance. The double-balanced quadrature mixer has a measured conversion gain of 32 dB with a double sideband (DSB) noise figure (NF) of 8.5 dB at 30 MHz intermediate frequency (IF) while consuming only 0.56 mA of current from a 1.8 V supply. Published version 2010-04-14T04:23:28Z 2019-12-06T17:49:07Z 2010-04-14T04:23:28Z 2019-12-06T17:49:07Z 2009 2009 Journal Article Boon, C. C., Do, M. A., Yeo, K. S., Cabuk, A., & Do, A. V. (2009). A Weak-Inversion Low-Power Active Mixer for 2.4 GHz ISM Band Applications. IEEE Microwave and Wireless Components Letters, 19 (11), 719-721. 1531-1309 https://hdl.handle.net/10356/90519 http://hdl.handle.net/10220/6233 10.1109/LMWC.2009.2032014 144516 en IEEE microwave and wireless components letters © 2009 IEEE. Personal use of this material is permitted. However, permission to reprint/republish this material for advertising or promotional purposes or for creating new collective works for resale or redistribution to servers or lists, or to reuse any copyrighted component of this work in other works must be obtained from the IEEE. This material is presented to ensure timely dissemination of scholarly and technical work. Copyright and all rights therein are retained by authors or by other copyright holders. All persons copying this information are expected to adhere to the terms and constraints invoked by each author's copyright. In most cases, these works may not be reposted without the explicit permission of the copyright holder. 3 p. application/pdf
institution	Nanyang Technological University
building	NTU Library
country	Singapore
collection	DR-NTU
language	English
topic	DRNTU::Engineering::Electrical and electronic engineering::Antennas, wave guides, microwaves, radar, radio
spellingShingle	DRNTU::Engineering::Electrical and electronic engineering::Antennas, wave guides, microwaves, radar, radio Boon, Chirn Chye Do, Manh Anh Yeo, Kiat Seng Cabuk, Alper Do, Aaron V. A weak-inversion low-power active mixer for 2.4 GHz ISM band applications
description	This work describes a fully integrated active mixer designed in 0.18µm CMOS technology for 2.4 GHz Industrial, Scientific and Medical (ISM) band applications. The mixer uses a source driven local oscillator (LO) to integrate the RF-LO buffering with the active mixer, and weakly inverted input MOSFETs to improve the gain and noise performance. The double-balanced quadrature mixer has a measured conversion gain of 32 dB with a double sideband (DSB) noise figure (NF) of 8.5 dB at 30 MHz intermediate frequency (IF) while consuming only 0.56 mA of current from a 1.8 V supply.
author2	School of Electrical and Electronic Engineering
author_facet	School of Electrical and Electronic Engineering Boon, Chirn Chye Do, Manh Anh Yeo, Kiat Seng Cabuk, Alper Do, Aaron V.
format	Article
author	Boon, Chirn Chye Do, Manh Anh Yeo, Kiat Seng Cabuk, Alper Do, Aaron V.
author_sort	Boon, Chirn Chye
title	A weak-inversion low-power active mixer for 2.4 GHz ISM band applications
title_short	A weak-inversion low-power active mixer for 2.4 GHz ISM band applications
title_full	A weak-inversion low-power active mixer for 2.4 GHz ISM band applications
title_fullStr	A weak-inversion low-power active mixer for 2.4 GHz ISM band applications
title_full_unstemmed	A weak-inversion low-power active mixer for 2.4 GHz ISM band applications
title_sort	weak-inversion low-power active mixer for 2.4 ghz ism band applications
publishDate	2010
url	https://hdl.handle.net/10356/90519 http://hdl.handle.net/10220/6233
_version_	1681034310952419328

A weak-inversion low-power active mixer for 2.4 GHz ISM band applications

Similar Items