High-speed jetting and spray formation from bubble collapse
A method to create impacting jets at the micrometer length scale by means of a collapsing cavitation bubble is presented. A focused shock wave from a lithotripter leads to the nucleation of a cavitation bubble below a hole of 25 μm diameter etched in a silicon plate. The plate is placed at an air-wa...
Saved in:
| Main Authors: | , , , , , , |
|---|---|
| Other Authors: | |
| Format: | Article |
| Language: | English |
| Published: |
2013
|
| Online Access: | https://hdl.handle.net/10356/95215 http://hdl.handle.net/10220/9229 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Institution: | Nanyang Technological University |
| Language: | English |
| Summary: | A method to create impacting jets at the micrometer length scale by means of a collapsing cavitation bubble is presented. A focused shock wave from a lithotripter leads to the nucleation of a cavitation bubble below a hole of 25 μm diameter etched in a silicon plate. The plate is placed at an air-water interface. The expansion and collapse of the bubble leads to two separate jets—an initial slow jet of velocity ∼10 m/s and a later faster jet of velocity ∼50 m/s. The jets subsequently impact coaxially, resulting in a circular sheet of liquid in the plane perpendicular to their axis. The sheet is characterized by a ring of droplets at its rim and breaks up into a spray as the shock pressure is increased. The results demonstrate an approach to create a high-speed jet and fine spray on demand at the micrometer scale. |
|---|