Fast synthesis of α-MoO3 nanorods with controlled aspect ratios and their enhanced lithium storage capabilities

• Main Authors: Chen, Jun Song, Cheah, Yan Ling, Madhavi, Srinivasan, Lou, David Xiong Wen
• 其他作者: School of Chemical and Biomedical Engineering
• 格式: Article
• 語言: English
• 出版: 2012
• 主題: DRNTU::Engineering::Materials
• 在線閱讀: https://hdl.handle.net/10356/95706; http://hdl.handle.net/10220/8316
• 機構: Nanyang Technological University

Uniform α-MoO3 nanorods are synthesized with controlled aspect ratios through a fast hydrothermal route. The control over the aspect ratio of these as-prepared nanorods is realized by applying different reaction times of 2−20 h. Specifically, the nanorods prepared with a reaction time of 2 h are, on average, much shorter in length and slightly smaller in width compared with those obtained with a longer reaction time of 20 h. The products are thoroughly characterized by FESEM/TEM/XRD/BET techniques. The electrochemical properties of the samples are analyzed using cyclic voltammetry and charge−discharge cycling. These studies reveal that the as-prepared nanorods with a smaller aspect ratio exhibit a higher initial discharge capacity, a lower irreversible loss, and better rate behavior at different charge−discharge rates. When compared to α-MoO3 submicrometer particles prepared through direct thermal decomposition, these as-prepared nanorods show much better lihtium storage properties, demonstrating that enhanced physical and/or chemical properties can be obained from proper nanostructuring of the material.