The role of hydrodynamic conditions and pH on algal-rich water fouling of ultrafiltration

The aim of this paper was to study the membrane fouling phenomena by eutrophic water using Microcystis aeruginosa under various operational conditions (flux and air flow rate) and solution chemistry (pH). All the experiments were performed in a lab scale employing the polyvinyl chloride ultrafiltrat...

Full description

Saved in:
Bibliographic Details
Main Authors: Zhang, Yan., Tang, Chuyang Y., Li, Guibai.
Other Authors: School of Civil and Environmental Engineering
Format: Article
Language:English
Published: 2013
Online Access:https://hdl.handle.net/10356/96441
http://hdl.handle.net/10220/10250
Tags: Add Tag
No Tags, Be the first to tag this record!
Institution: Nanyang Technological University
Language: English
id sg-ntu-dr.10356-96441
record_format dspace
spelling sg-ntu-dr.10356-964412020-03-07T11:43:44Z The role of hydrodynamic conditions and pH on algal-rich water fouling of ultrafiltration Zhang, Yan. Tang, Chuyang Y. Li, Guibai. School of Civil and Environmental Engineering The aim of this paper was to study the membrane fouling phenomena by eutrophic water using Microcystis aeruginosa under various operational conditions (flux and air flow rate) and solution chemistry (pH). All the experiments were performed in a lab scale employing the polyvinyl chloride ultrafiltration membrane with nominal cut-off of 10 kDa. A slight fouling appeared at the flux not more than 10 L/m2/h, and the trend of trans-membrane pressure (TMP) development varied as a function of flux from linear to exponential with the increase of cell concentration. This paper also studied an important consideration of aeration in algal fouling: shear force. Besides alleviating membrane fouling, the shear produced by the bubbling should take responsible for the breakup of cells and the release of intracellular organic matters which caused the rate of the TMP increase closed to that without aeration. The optimum aeration intensity was observed to be 2.5 m3/m2/h in this experimental condition. As another important parameter considered in the study, the pH value of the raw water changed the physical and chemical reaction between the membrane and foulants or themselves. The results showed that the final TMP reduced with the pH increase due to the electro-static repulsion strengthening between the macromolecules which developed a looser gel. The most severe fouling was obtained at pH 5.0 near to the iso-electric point of algal solution, where electrostatic repulsion between algal cells was weakest. Furthermore, low pH value had a negative impact on cell integrity which gave rise to much more dissolved algogenic organic matter in the solution. It also played a part role on the membrane fouling. 2013-06-12T04:54:35Z 2019-12-06T19:30:53Z 2013-06-12T04:54:35Z 2019-12-06T19:30:53Z 2012 2012 Journal Article Zhang, Y., Tang, C. Y., & Li, G. (2012). The role of hydrodynamic conditions and pH on algal-rich water fouling of ultrafiltration. Water Research, 46(15), 4783-4789. 0043-1354 https://hdl.handle.net/10356/96441 http://hdl.handle.net/10220/10250 10.1016/j.watres.2012.06.020 en Water research © 2012 Elsevier Ltd.
institution Nanyang Technological University
building NTU Library
country Singapore
collection DR-NTU
language English
description The aim of this paper was to study the membrane fouling phenomena by eutrophic water using Microcystis aeruginosa under various operational conditions (flux and air flow rate) and solution chemistry (pH). All the experiments were performed in a lab scale employing the polyvinyl chloride ultrafiltration membrane with nominal cut-off of 10 kDa. A slight fouling appeared at the flux not more than 10 L/m2/h, and the trend of trans-membrane pressure (TMP) development varied as a function of flux from linear to exponential with the increase of cell concentration. This paper also studied an important consideration of aeration in algal fouling: shear force. Besides alleviating membrane fouling, the shear produced by the bubbling should take responsible for the breakup of cells and the release of intracellular organic matters which caused the rate of the TMP increase closed to that without aeration. The optimum aeration intensity was observed to be 2.5 m3/m2/h in this experimental condition. As another important parameter considered in the study, the pH value of the raw water changed the physical and chemical reaction between the membrane and foulants or themselves. The results showed that the final TMP reduced with the pH increase due to the electro-static repulsion strengthening between the macromolecules which developed a looser gel. The most severe fouling was obtained at pH 5.0 near to the iso-electric point of algal solution, where electrostatic repulsion between algal cells was weakest. Furthermore, low pH value had a negative impact on cell integrity which gave rise to much more dissolved algogenic organic matter in the solution. It also played a part role on the membrane fouling.
author2 School of Civil and Environmental Engineering
author_facet School of Civil and Environmental Engineering
Zhang, Yan.
Tang, Chuyang Y.
Li, Guibai.
format Article
author Zhang, Yan.
Tang, Chuyang Y.
Li, Guibai.
spellingShingle Zhang, Yan.
Tang, Chuyang Y.
Li, Guibai.
The role of hydrodynamic conditions and pH on algal-rich water fouling of ultrafiltration
author_sort Zhang, Yan.
title The role of hydrodynamic conditions and pH on algal-rich water fouling of ultrafiltration
title_short The role of hydrodynamic conditions and pH on algal-rich water fouling of ultrafiltration
title_full The role of hydrodynamic conditions and pH on algal-rich water fouling of ultrafiltration
title_fullStr The role of hydrodynamic conditions and pH on algal-rich water fouling of ultrafiltration
title_full_unstemmed The role of hydrodynamic conditions and pH on algal-rich water fouling of ultrafiltration
title_sort role of hydrodynamic conditions and ph on algal-rich water fouling of ultrafiltration
publishDate 2013
url https://hdl.handle.net/10356/96441
http://hdl.handle.net/10220/10250
_version_ 1681047841710014464