In situ formed bulk nanostructured Ti-base composites

In situ formed bulk nanostructured Ti-base composites

10.4028/www.scientific.net/JMNM.24-25.31

Saved in:

Bibliographic Details
Main Authors:	Eckert, J., Das, J., He, G., Loser, W., Ma, E., Li, Y., Sui, M.L., Woodcock, T.G., Gebert, A.
Other Authors:	MATERIALS SCIENCE
Format:	Article
Published:	2014
Subjects:	Composite Deformation Dendrite Nano-eutectic Ti-base alloy
Online Access:	http://scholarbank.nus.edu.sg/handle/10635/107072
Tags:	Add Tag No Tags, Be the first to tag this record!
Institution:	National University of Singapore

Similar Items

Processing and deformation mechanisms of bulk ultrafine grained and nanostructured Mg alloy via mechanical alloying technique
by: CHUA BENG WAH
Published: (2010)

Bulk hard magnetic alloys in Nd-Fe-B system prepared by casting and melt spinning
by: Kong, H.Z., et al.
Published: (2014)

Microstructure control and ductility improvement of La-Al-(Cu, Ni) composites by Bridgman solidification
by: Zhang, Y., et al.
Published: (2014)

Heat treatment characteristics of high chromium cast iron for abrasion wear resistance
by: Sudsakorn Inthidech
Published: (2006)

Heat treatment behavior of high chromium cast iron for abrasive wear resistance
by: Sudsakorn Inthidech
Published: (2007)

A study of the glass forming ability in ZrNiAl alloys
by: Jing, Q., et al.
Published: (2014)

Calculation of Lindemann's melting Temperature and' Eutectic Point of bcc Binary Alloys
by: Nguyen, Van Hung, et al.
Published: (2017)

Laser Reactive Formation of Ti/TiN in Situ Composite
by: Tang, Y.X., et al.
Published: (2014)

Development of Nano-composites Based on Magnesium Alloys System AZ31B
by: NGUYEN QUY BAU
Published: (2010)

Increasing significantly the failure strain and work of fracture of solidification processed AZ31B using nano-Al2O3 particulates
by: Nguyen, Q.B., et al.
Published: (2014)

Glass forming ability of binary ZR-CU and ternary ZR-CU-AL alloys
by: WANG DONG
Published: (2010)

Multiple maxima of GFA in three adjacent eutectics in Zr-Cu-Al alloy system - A metallographic way to pinpoint the best glass forming alloys
by: Wang, D., et al.
Published: (2014)

Glass forming ability of La-rich La-Al-Cu ternary alloys
by: Tan, H., et al.
Published: (2014)

Enhancing compressive response of AZ31B using nano-Al2O3 and copper additions
by: Nguyen, Q.B., et al.
Published: (2014)

Composition optimization of the NiZrYAl glass forming alloys
by: Jing, Q., et al.
Published: (2014)

Enhancing mechanical properties of AZ31 magnesium alloy through simultaneous addition of aluminum and nano-Al2O3
by: Han, S., et al.
Published: (2014)

Sliding wear behaviour of AZ31B magnesium alloy and nano-composite
by: Srinivasan, M., et al.
Published: (2014)

Atomistic study on the super-elasticity of single crystal bulk NiTi shape memory alloy under adiabatic condition
by: Wang, Bing, et al.
Published: (2020)

Improvement in mechanical properties of in-situ Al-TiB2 composite by incorporation of carbon
by: Tee, K.L., et al.
Published: (2014)

Optimal glass-forming composition and its correlation with eutectic reaction in the Ti-Ni-Al ternary system
by: Lu, B.-c., et al.
Published: (2014)

Structural changes and thermal stability of mechanically alloyed Ti-Al powders with additions of Mn and Nb
by: Lu, L., et al.
Published: (2014)

A molecular dynamics simulation to shed light on the mechanical alloying of an Al-Zr alloy induced by severe plastic deformation
by: Morkina, Alina Y., et al.
Published: (2024)

Glass forming ability and type of eutectic coupled zone
by: Tan, H., et al.
Published: (2014)

Synthesis of in situ Al-TiB2 composites using stir cast route
by: Tee, K.L., et al.
Published: (2014)

Effect of Cu Content on Atomic Positions of Ti50Ni50−xCux Shape Memory Alloys Based on Density Functional Theory Calculations
by: Gou, Liangliang, et al.
Published: (2015)

In situ preparation of TiB2 reinforced Al base composite
by: Lu, L., et al.
Published: (2014)

Kinetics of hot deformation in Mg/Nano-Al2O3 composite
by: Prasad, Y.V.R.K., et al.
Published: (2014)

Microstructure and Properties of Semi-Solid Al Alloy 7075 after Heat Treatment
by: Narissara Mahathaninwong
Published: (2013)

Stabilizing sub-2-nm CuIr nanoalloys with cucurbit[6]uril for oxygen evolution reaction in strong acid
by: You, Hanhui, et al.
Published: (2024)

Laser induced hydrophobicity on the TI6AL4V additive manufacturing parts
by: Jiao, Lishi, et al.
Published: (2018)

Cyclic deformation and lattice strain distribution of high Nb containing TiAl alloy
by: Ding, Jie, et al.
Published: (2020)

In situ preparation of TiB2 reinforced Al based composites
by: Lakshmi, S., et al.
Published: (2014)

Application of thermodynamic calculation in the in-situ process of Al/TiB2
by: Yue, N.L., et al.
Published: (2014)

Lamellar eutectic-like structure in peritectic Zn-Cu system
by: Ma, D., et al.
Published: (2014)

A stretchable and self‐healing energy storage device based on mechanically and electrically restorative liquid‐metal particles and carboxylated polyurethane composites
by: Park, Sangbaek, et al.
Published: (2020)

Towards high-performance aqueous sodium ion batteries: constructing hollow NaTi₂(PO₄)₃@C nanocube anode with Zn metal-induced pre-sodiation and deep eutectic electrolyte
by: Hou, Zhiguo, et al.
Published: (2022)

Two-dimensional melting of two- and three-component mixtures
by: Li, Yan-Wei, et al.
Published: (2023)

Study on Elastic Deformation of Interstitial Alloy FeC with BCC Structure under Pressure
by: Nguyen, Quang Hoc, et al.
Published: (2019)

Enhancing corrosion resistance of Mg alloy AZ31B in NaCl solution using alumina reinforcement at nanolength scale
by: Kukreja, M., et al.
Published: (2014)

Using hierarchical composite approach to improve mechanical response of Mg and Mg-Bi2O3 nano-composites
by: Habibi, M.K., et al.
Published: (2014)