Void formation in wide gap brazing using prepacks of nickel base braze mixes

Void formation in wide gap brazing using prepacks of nickel base braze mixes

Materials Science and Technology

Saved in:

書目詳細資料
Main Authors:	Tung, S.K., Lim, L.C.
其他作者:	MECHANICAL & PRODUCTION ENGINEERING
格式:	Article
出版:	2014
在線閱讀:	http://scholarbank.nus.edu.sg/handle/10635/58912
標簽:	添加標簽沒有標簽, 成為第一個標記此記錄!

相似書籍

Wide gap brazing with prepacks of nickel base braze mixes
由: Tung, S.K., et al.
出版: (2014)

Nickel base wide gap brazing with preplacement technique Part 2 - Formation mechanisms of macrovoids
由: Lim, L.C., et al.
出版: (2014)

WIDE GAP BRAZING WITH PRE-PACKS
由: TUNG SIEW KONG
出版: (2020)

MECHANICAL PROPERTIES OF NICKEL BASE WIDE GAP BRAZED JOINT
由: WEI DAKE
出版: (2020)

Effects of gap filler and brazing temperature on fracture and fatigue of wide-gap brazed joints
由: Yu, Y.H., et al.
出版: (2014)

PRACTICAL ASPECTS OF WIDE-GAP BRAZING
由: LEE WEE YIN
出版: (2020)

Nickel base wide gap brazing with preplacement techniqee part 1 - Effect of material and process parameters on formation of macrovoids
由: Lim, L.C., et al.
出版: (2014)

Evolution of nickel borides in Ni-Si-B brazed joints of nickel during post-braze heat treatment
由: Tung, S.K., et al.
出版: (2014)

FRACTURE AND FATIGUE OF STAINLESS STEEL WIDE GAP BRAZED WITH NICKEL BASED FILLER METALS
由: YU YONGHE
出版: (2020)

MICROSTRUCTURAL STUDIES OF NICKEL-BASED BRAZES
由: TUNG SIEW KONG
出版: (2020)

Solidification phenomena in nickel base brazes containing boron and silicon
由: Tung, S.K., et al.
出版: (2014)

Microstructural evolution and control in BNi-4 brazed joints of nickel 270
由: Tung, S.K., et al.
出版: (2014)

TLP brazing of nickel-based superalloys and high alloy steels
由: Wu, Xiao Wei.
出版: (2008)

Embrittlement of brazed martensitic stainless steel
由: Goh, G.K.L., et al.
出版: (2014)

Repair of trailing edge of C1023 NGVs by a gouge-and-braze technique
由: Lim, L.C., et al.
出版: (2014)

New material brazing
由: Sivaprasaath, Chandrasagaran
出版: (2018)

Further development of expert system for application of iso 11745 brazing for aerospace applications — qualification test for brazers and brazing operators — brazing of metallic components
由: Aung, Naing Htoo
出版: (2017)

BRAZING OF SINGLE CRYSTAL NICKEL WITH NI-B-SI FILLER METAL
由: WU HAIMING
出版: (2020)

Induction transient liquid phase bonding of Inconel 718 with the nickel-based sintered brazing preform
由: Yan, Guangxu, et al.
出版: (2021)

Analysing the effects of brazing inconel alloy
由: Dain Ibrahim Rahman
出版: (2018)

Vacuum brazing of dissimilar aluminium alloys
由: Wong, Chun Long
出版: (2023)

MICROSTRUCTURE AND PROPERTIES OF BRAZED COMPOSITE COATINGS
由: DAVID LEE
出版: (2019)

Active metal brazing of ceramic to ceramic and ceramic to metal
由: Zhang, Jixuan
出版: (2008)

Induction brazing for rapid localized repair of Inconel 718
由: Aprilia, A., et al.
出版: (2022)

Effect of braze flux on direct laser sintering Cu-based metal powder
由: Zhu, H.H., et al.
出版: (2014)

Laser brazing of Inconel-718 with BNi-2 filler metal
由: Koh, Boris Yee Hui
出版: (2019)

Vacuum brazing of dissimilar Al 7075 and Al–25 Si alloy
由: Liu, Dashuang, et al.
出版: (2023)

Strategy of incorporating Ni-based braze alloy in cold sprayed Inconel 718 coating
由: Sun, Wen, et al.
出版: (2021)

Semi-Solid State Joining of SSM Aluminum Alloys Using Brazing ZA27
由: Thammanoon Phonin, et al.
出版: (2019)

Effect of Cu interlayer on the microstructure and strength for brazing of Tungsten/316L steel
由: Wang, Meng, et al.
出版: (2020)

Development of new fusion welding and induction brazing techniques for the joining of Nickel-based high A1 and Ti containing precipitation strenghtened superalloys and steels
由: Chandel, Roop Singh., et al.
出版: (2008)

Post-braze heat treatment of Inconel 718 alloy with BNi-2 filler metal
由: Chan, Chee Choong
出版: (2018)

Microstructure and mechanical properties of furnace brazed Joints of Inconel 718 with Ni-based filler alloy (BNi-2)
由: Liu, Cheuk Wing
出版: (2018)

Study on the mechanical properties of brazing of Inconel 718 with pre-sintered preforms (PSP, AMS 4777)
由: Liew, Yin Fei
出版: (2018)

Evaluation of hardness of the interfacial reaction products at the alumina-stainless steel brazed interface by modeling of nanoindentation results
由: Kar, A., et al.
出版: (2014)

Diameter dependence of the void formation in the oxidation of nickel nanowires
由: Ren, Y., et al.
出版: (2014)

Analisis Pengaruh Proses Brazing Kuningan Terhadap Pcrubahan Sifat Mekanis dari Pipa Baja Karbon Rendah
由: Perpustakaan UGM, i-lib
出版: (2010)

Prepacked grouting process in concrete construction
由: Swaddiwudhipong, S., et al.
出版: (2014)

STUDI PENGARUH TEMPERATUR PADA ZONA TRANSISI HASIL FURNACE BRAZING BAJA KARBON RENDAH DENGAN LOGAM PENGISI KUNINGAN
由: Hasna Ghaida Taufik, Afina

A novel method for improving interfacial joining strength of vacuum brazed TiAl/GH3536 thin-walled structure by Au coating
由: Luo, Yun, et al.
出版: (2023)