Layer manufacturing of magnesium and its alloy structures for future applications

Layer manufacturing of magnesium and its alloy structures for future applications

10.1080/17452751003718629

Saved in:

書目詳細資料
Main Authors:	Ng, C.C., Savalani, M.M., Man, H.C., Gibson, I.
其他作者:	MECHANICAL ENGINEERING
格式:	Article
出版:	2014
主題:	Applications Layer manufacturing Magnesium Magnesium alloy structures Selective laser melting
在線閱讀:	http://scholarbank.nus.edu.sg/handle/10635/60643
標簽:	添加標簽沒有標簽, 成為第一個標記此記錄!
機構:	National University of Singapore

相似書籍

Exceptional increase in the creep life of magnesium rare-earth alloys due to localized bond stiffening
由: Choudhuri, Deep, et al.
出版: (2018)

Effect of processing environment on laser-induced darkening evolution in magnesium alloy
由: Guan, Ying Chun, et al.
出版: (2016)

Influence of Overlapping Tracks on Microstructure Evolution and Corrosion Behavior in Laser-melt Magnesium Alloy
由: Guan, Ying Chun, et al.
出版: (2016)

Mechanisms of cracking in laser welding of magnesium alloy AZ91D
由: Zhou, Wei, et al.
出版: (2022)

Darkening effect on AZ31B magnesium alloy surface induced by nanosecond pulse Nd:YAG laser
由: Guan, Y.C., et al.
出版: (2016)

Analysis of selective vaporization behavior in laser melting of magnesium alloy by plume deposition
由: Guan, Y., et al.
出版: (2016)

Laser-induced microstructural development and phase evolution in magnesium alloy
由: Guan, Yingchun, et al.
出版: (2016)

Magnesium injection molding
由: Czerwinski, Franciszek
出版: (2017)

Selective enhancement of tensile/compressive strength and ductility of AZ31 magnesium alloy via nano-AL2O3 reinforcement integration method alteration
由: Paramsothy, M., et al.
出版: (2014)

Development from alloys to nanocomposite for an enhanced mechanical and ignition response in magnesium
由: Tun, Khin Sandar, et al.
出版: (2022)

From waste to high strength alloy - Recycling of magnesium chips
由: Lu, L., et al.
出版: (2014)

From waste to high strength alloy - Recycling of magnesium chips
由: Lu, L., et al.
出版: (2014)

Enhancing tensile/compressive response of magnesium alloy AZ31 by integrating with Al2O3 nanoparticles
由: Paramsothy, M., et al.
出版: (2014)

Enhancing corrosion resistance of Mg alloy AZ31B in NaCl solution using alumina reinforcement at nanolength scale
由: Kukreja, M., et al.
出版: (2014)

Femtosecond laser-induced iridescent effect on AZ31B magnesium alloy surface
由: Guan, Ying Chun, et al.
出版: (2016)

The effect of scanning strategy on the thermal behavior and residual stress distribution of damping alloys during selective laser melting
由: Yan, Zhiqiang, et al.
出版: (2024)

The economic feasibility of manufacturing magnesium sulfate in the Philippines
由: Lim, Wilbert, et al.
出版: (1981)

Fabrication and characteristics of magnesium alloys produced via powder metallurgy
由: Cao, P., et al.
出版: (2014)

Wear of Mg-5%Al-5%Nd alloy with nanocrystalline grain size
由: Lim, C.Y.H., et al.
出版: (2014)

Fabrication and Microstructure of Mechanically Alloyed Mg-Al-Nd Alloys
由: Yan, C., et al.
出版: (2014)

Effect of Deformation and Temperature Paths in Severe Plastic Deformation Using Groove Pressing on Microstructure, Texture, and Mechanical Properties of AZ31-O
由: Fong, Kai Soon, et al.
出版: (2016)

Corrosion behavior, microstructure and mechanical properties of novel mg-zn-ca-er alloy for bio-medical applications
由: Panemangalore, Devadas Bhat, et al.
出版: (2022)

Sliding wear behaviour of AZ31B magnesium alloy and nano-composite
由: Srinivasan, M., et al.
出版: (2014)

Development of new magnesium based alloys and their nanocomposites
由: Alam, M.E., et al.
出版: (2014)

The Origin of High Strength and High Ductility in Nanostructured Mg-5%Al-x%Nd Alloys
由: Lu, L., et al.
出版: (2014)

Synthesis and mechanical properties of nanostructured Mg-Al-Nd alloys
由: Yan, C., et al.
出版: (2014)

Hydrothermally deposited protective and bioactive coating for magnesium alloys for implant application
由: Falahieh Asl, Sara Kaabi, et al.
出版: (2016)

Nanoparticle addition to enhance the mechanical response of magnesium alloys including nanoscale deformation mechanisms
由: Paramsothy, M., et al.
出版: (2014)

Selective Laser Melting Of Nickel Base Heat Resistance Alloy EP648
由: Nerush, S. V., et al.
出版: (2016)

Producing Hip Implants Of Titanium Alloys By Additive Manufacturing
由: Evgenii, Borisov, et al.
出版: (2016)

Development from alloys to nanocomposite for an enhanced mechanical and ignition response in magnesium
由: Tun, Khin Sandar, et al.
出版: (2022)

DEVELOPMENT OF ECO-MAGNESIUM ALLOY/COMPOSITES TARGETING STRUCTURAL/BIOMEDICAL APPLICATIONS
由: GURURAJ PARANDE
出版: (2020)

Thermomechanical processing of AZ31-3Ca alloy prepared by disintegrated melt deposition (DMD)
由: Rao, K.P., et al.
出版: (2021)

Microstructure stability of a fine-grained AZ31 magnesium alloy processed by constrained groove pressing during isothermal annealing
由: Fong, Kai Soon, et al.
出版: (2019)

Development and characterization of new AZ41 and AZ51 magnesium alloys
由: Alam, Md.E., et al.
出版: (2014)

Carbon nanotube addition to concentrated magnesium alloy AZ81: Enhanced ductility with occasional significant increase in strength
由: Paramsothy, M., et al.
出版: (2014)

Improving microstructural and mechanical response of new AZ41 and AZ51 magnesium alloys through simultaneous addition of nano-sized Al 2O3 particulates and Ca
由: Alam, M.E., et al.
出版: (2014)

The mechanical behavior of magnesium alloy AZ91 reinforced with fine copper particulates
由: Ho, K.F., et al.
出版: (2014)

Review of superior mechanical and corrosion properties of wrought magnesium based materials containing nanoparticles
由: Paramsothy, M., et al.
出版: (2014)

Rate-dependent hardening due to twinning in an ultrafine-grained magnesium alloy
由: Li, B., et al.
出版: (2014)