Investigation of micro-EDM material removal characteristics using single RC-pulse discharges

Investigation of micro-EDM material removal characteristics using single RC-pulse discharges

10.1016/S0924-0136(03)00771-4

Saved in:

書目詳細資料
Main Authors:	Wong, Y.S., Rahman, M., Lim, H.S., Han, H., Ravi, N.
其他作者:	MECHANICAL ENGINEERING
格式:	Conference or Workshop Item
出版:	2014
主題:	Discharge energy Efficiency Material removal mechanism Micro-EDM Modeling Spark gap
在線閱讀:	http://scholarbank.nus.edu.sg/handle/10635/73559
標簽:	添加標簽沒有標簽, 成為第一個標記此記錄!

相似書籍

Micro-Electro Discharge Machining (μEDM)
由: Jahan, M.P., et al.
出版: (2014)

Influences of pulsed power condition on the machining properties in micro EDM
由: Son, S., et al.
出版: (2014)

A study on the machining of high-aspect ratio micro-structures using micro-EDM
由: Lim, H.S., et al.
出版: (2014)

Transitions of micro-EDM/SEDCM/micro-ECM milling in low-resistivity deionized water
由: Nguyen, M.D., et al.
出版: (2014)

Modeling of radial gap formed by material dissolution in simultaneous micro-EDM and micro-ECM drilling using deionized water
由: Nguyen, M.D., et al.
出版: (2014)

A study on the quality micro-hole machining of tungsten carbide by micro-EDM process using transistor and RC-type pulse generator
由: Jahan, M.P., et al.
出版: (2014)

MICRO-EDM-BASED MULTI-PROCESS MACHINING OF TUNGSTEN CARBIDE
由: MUHAMMAD PERVEJ JAHAN
出版: (2010)

Fabrication of EDM electrodes by localized electrochemical deposition
由: Habib, M.A., et al.
出版: (2014)

Performance analysis of EDM electrode fabricated by localized electrochemical deposition for micro-machining of stainless steel
由: Habib, M.A., et al.
出版: (2014)

Simultaneous micro-EDM and micro-ECM in low-resistivity deionized water
由: Nguyen, M.D., et al.
出版: (2014)

A comparative study on the performance of sinking and milling micro-EDM for nanofinishing of tungsten carbide
由: Jahan, M.P., et al.
出版: (2014)

An experimental study on micro-EDM in low-resistivity deionized water using short voltage pulses
由: Nguyen, M.D., et al.
出版: (2014)

An Experimental Investigation on Surface Characteristics of Tool Steel using Powder Mixed Micro-EDM
由: MOHAMMED MUNTAKIM ANWAR
出版: (2010)

Profile error compensation in high precision 3D micro-EDM milling
由: Nguyen, M.D., et al.
出版: (2014)

Design, Development and Study of Optimal Parameters of a Micro Wire Electrical Discharge Machining (WEDM) Device
由: SADIQ MOHAMMAD ALAM
出版: (2010)

Tool-based micro-machining
由: Asad, A.B.M.A., et al.
出版: (2014)

Development of localized electrochemical deposition process for the fabrication of on-machine micro-EDM electrode
由: MOHAMMAD AHSAN HABIB
出版: (2010)

Study of micro-EDM of tungsten carbide with workpiece vibration
由: Jahan, M.P., et al.
出版: (2014)

Migration of materials during finishing micro-EDM of tungsten carbide
由: Jahan, M.P., et al.
出版: (2014)

Study on the nano-powder-mixed sinking and milling micro-EDM of WC-Co
由: Jahan, M.P., et al.
出版: (2014)

Effect of TiC in copper-tungsten electrodes on EDM performance
由: Li, L., et al.
出版: (2014)

An experimental investigation of single and multi-tool micro-EDM
由: MASHEED AHMAD
出版: (2010)

Integrated hybrid micro/nano-machining
由: Rahman, M., et al.
出版: (2014)

Fabrication of PCD micro tools using block EDM methode and their application to different microstructures in brittle and hard materials
由: Perveen, A., et al.
出版: (2014)

Simultaneous Micro-EDM and Micro-ECM in Low-resistivity Deionized Water
由: NGUYEN MINH DANG
出版: (2013)

Study of the diffusion of carbon, its sources, and effect on finishing micro-EDM performance of cemented carbide
由: Jahan, M.P., et al.
出版: (2014)

EDM performance of TiC/copper-based sintered electrodes
由: Li, L., et al.
出版: (2014)

Micro-EDM Process for Tool-based Compound Micromachining
由: ABU BAKAR MD ALI ASAD
出版: (2012)

Effect of micro-powder suspension and ultrasonic vibration of dielectric fluid in micro-EDM processes-Taguchi approach
由: Prihandana, G.S., et al.
出版: (2014)

A STUDY OF THE OPTIMUM PARAMETERS IN EDM MACHINING OF TUNGSTEN CARBIDE MATERIAL
由: KHIN MOE AYE
出版: (2020)

An experimental investigation on the surface characteristics of tungsten carbide for the fine-finish die-sinking and scanning micro-EDM
由: Jahan, M.P., et al.
出版: (2014)

A review on the conventional and micro-electrodischarge machining of tungsten carbide
由: Jahan, M.P., et al.
出版: (2014)

A study on the fine-finish die-sinking micro-EDM of tungsten carbide using different electrode materials
由: Jahan, M.P., et al.
出版: (2014)

Evaluation of the effectiveness of low frequency workpiece vibration in deep-hole micro-EDM drilling of tungsten carbide
由: Jahan, M.P., et al.
出版: (2014)

Nanofinishing of hard materials using micro-electrodischarge machining
由: Jahan, M.P., et al.
出版: (2014)

Study of the effect of machining parameters on the machining characteristics in electrical discharge machining of tungsten carbide
由: Lee, S.H., et al.
出版: (2014)

Study of Micro-grinding of Glass using On-machine Fabricated Polycrystalline Diamond (PCD) by Micro-EDM
由: ASMA PERVEEN
出版: (2012)

On-machine fabrication of high-aspect-ratio micro-electrodes and application in vibration-assisted micro-electrodischarge drilling of tungsten carbide
由: Jahan, M.P., et al.
出版: (2014)

An experimental investigation into the micro-electrodischarge machining behavior of p-type silicon
由: Jahan, M.P., et al.
出版: (2014)

Enhanced surface integrity and dimensional accuracy by simultaneous micro-ED/EC milling
由: Nguyen, M.D., et al.
出版: (2014)