An elasto-plastic finite element model for polyethylene wear in total hip arthroplasty

An elasto-plastic finite element model for polyethylene wear in total hip arthroplasty

10.1016/S0021-9290(01)00215-9

Saved in:

書目詳細資料
Main Authors:	Teoh, S.H., Chan, W.H., Thampuran, R.
其他作者:	MECHANICAL ENGINEERING
格式:	Article
出版:	2014
主題:	Clearance Elasto-plastic model Finite element Hip arthroplasty Polyethylene wear
在線閱讀:	http://scholarbank.nus.edu.sg/handle/10635/84858
標簽:	添加標簽沒有標簽, 成為第一個標記此記錄!

相似書籍

Polyethylene thickness in unicompartmental knee arthroplasty
由: Lingaraj, K., et al.
出版: (2014)

Vesico-Hip Fistula from Bladder Puncture with Subsequent Infected Total Hip Arthroplasty
由: Vishwanath, J., et al.
出版: (2016)

Dynamic response of elasto-plastic planar arches
由: Lee, S.L., et al.
出版: (2014)

Settlement analysis for an embankment considering visco-elasto-plastic characteristics
由: Shi, J., et al.
出版: (2014)

Nano-wear mechanism for ultra-high molecular weight polyethylene (UHMWPE) sliding against a model hard asperity
由: Wong, B.K.P., et al.
出版: (2014)

Unsaturated elasto-plastic constitutive equations for compacted kaolin under consolidated drained and shearing-infiltration conditions
由: Rahardjo, Harianto, et al.
出版: (2019)

Simulation of instrumented indentation and material characterization
由: Tho, K.K., et al.
出版: (2014)

Development and internal validation of machine learning algorithms to predict patient satisfaction after total hip arthroplasty
由: Zhang, Siyuan, et al.
出版: (2022)

Volume reduction of high impact polystyrene and polyethylene terephthalate plastic resins and wastes through microwave pyrolysis
由: Go, Geoffrey Hendrick, et al.
出版: (2008)

INFLAMMATORY-HYPOXIC FACTORS INVOLVED IN FAILURE OF HIP JOINT REPLACEMENTS
由: RITA HAMEISTER
出版: (2020)

Estimation of elasto-thermodynamic damping in the Al/SiC system using a finite element approach
由: Srikanth, N., et al.
出版: (2014)

Tribology of ultra high molecular weight polyethylene film on Si substrate with chromium nitride, titanium nitride and diamond like carbon as intermediate layers
由: Minn, M., et al.
出版: (2014)

Improving patient outcomes following total knee arthroplasty : identifying rehabilitation pathways based on modifiable psychological risk and resilience factors
由: Ditton, Elizabeth, et al.
出版: (2020)

The relevance of wear-mechanism maps to mild-oxidational wear
由: Lim, S.C
出版: (2014)

An implicit tensorial gradient plasticity model - Formulation and comparison with a scalar gradient model
由: Poh, L.H., et al.
出版: (2014)

Moisture diffusion and heat transfer in plastic IC packages
由: Tay, A.A.O., et al.
出版: (2014)

Epidemiology of hip fracture in Thais
由: Patarawan Woratanarat
出版: (2023)

An isotropic-plasticity-based constitutive model for martensitic reorientation and shape-memory effect in shape-memory alloys
由: Pan, H., et al.
出版: (2014)

Management of uncontained bone defect in revision total knee arthroplasty with duble modular metal augments : a report of 3 cases with a review of literature
由: Aree Tanavalee, et al.
出版: (2006)

Environmental impacts of conventional plastic and bio-based carrier bags: Part 2: End-of-life options
由: Khoo, H.H., et al.
出版: (2014)

Spread-of-plasticity analysis of three-dimensional steel frames
由: Jiang, X.-M., et al.
出版: (2014)

Patellar management in revision total knee arthroplasty. Is patellar resurfacing a better option?
由: Patil, N., et al.
出版: (2016)

Expectations and experiences of patients with osteoarthritis undergoing total joint arthroplasty: An integrative review
由: See M.T.A., et al.
出版: (2018)

DEVELOPMENT OF A NEW AND NOVEL TOTAL HIP PROSTHESIS
由: ALEX CHOH CHAW TAT
出版: (2018)

Gait analysis after total knee arthroplasty to evaluate the role of posterior cruciate ligament
由: Bose, K., et al.
出版: (2013)

Scratching of polymers-Modeling abrasive wear
由: Sinha, S.K., et al.
出版: (2014)

Modeling nano-indentation tests of glassy polymers using finite elements with strain gradient plasticity
由: Swaddiwudhipong, S., et al.
出版: (2014)

3D measurement of crater wear by phase shifting method
由: Wang, W.H., et al.
出版: (2014)

Plastic-damage model of lightweight concrete and normal weight concrete
由: TENG MINGQING
出版: (2010)

A project study on the production of polyethylene from ethylene
由: Anderson, Irwin H.
出版: (1964)

Severe Metallosis in an Isoelastic Hip Prosthesis
由: Thiagarajan, P., et al.
出版: (2016)

ULTRA-HIGH MOLECULAR WEIGHT POLYETHYLENE (UHMWPE) FOR WEAR APPLICATIONS - COMPOSITE MAKING AND THE SURPRISING POLYMER ON METAL POLISHING EFFECTS
由: LIU YEMEI
出版: (2014)

Coefficient of friction under dry and lubricated conditions of a fracture and wear resistant P/M titanium-graphite composite for biomedical applications
由: Teoh, S.H., et al.
出版: (2014)

Contact stresses in the knee during walking and squatting
由: Thambyah, A., et al.
出版: (2013)

Aseptic versus septic revision total knee arthroplasty: Patient satisfaction, outcome and quality of life improvement
由: Patil, N., et al.
出版: (2016)

Investigating the effects of polyethylene terephthalate (PET) plastic and fly ash on the mechnical properties of concrete
由: Crisostomo, Rafael Elijah M., et al.
出版: (2017)

Does stress shielding occur with the use of long-stem prosthesis in total knee arthroplasty?
由: Sathappan, S.S., et al.
出版: (2016)

Mechanism-based crystal plasticity modeling of twin boundary migration in nanotwinned face-centered-cubic metals
由: Mirkhani, H., et al.
出版: (2014)

Knowledge review on polyethylene terephthalate-degrading microbes and selection of soil microbes from Muntinlupa, Philippines with potential PET-degrading activity
由: Que, Johann Timothy C, et al.
出版: (2024)

Conversion of polyethylene into gasoline on HZSM-5 catalyst
由: Somsuk Trisupakitti
出版: (2008)