Surface modification of Al-Zn-Mg alloy by combined electrical discharge machining with ball burnish machining

Surface modification of Al-Zn-Mg alloy by combined electrical discharge machining with ball burnish machining

10.1016/S0890-6955(02)00026-3

Saved in:

書目詳細資料
Main Authors:	Lim, H.S., Fathima, K., Senthil Kumar, A., Rahman, M.
其他作者:	MECHANICAL ENGINEERING
格式:	Article
出版:	2014
主題:	Ball burnish machining Combined process Electric discharge machining Surface modification Surface roughness
在線閱讀:	http://scholarbank.nus.edu.sg/handle/10635/85705
標簽:	添加標簽沒有標簽, 成為第一個標記此記錄!

相似書籍

Study of the effect of machining parameters on the machining characteristics in electrical discharge machining of tungsten carbide
由: Lee, S.H., et al.
出版: (2014)

Study of the surface integrity of the machined workpiece in the EDM of tungsten carbide
由: Lee, S.H., et al.
出版: (2014)

Development of an on-machine profile measurement system in ELID grinding for machining aspheric surface with software compensation
由: Sazedur Rahman, M., et al.
出版: (2014)

Study of workpiece vibration in powder-suspended dielectric fluid in micro-EDM processes
由: Prihandana, G.S., et al.
出版: (2014)

Formation of electrical discharge machining electrode via laser cladding
由: Tang, Y., et al.
出版: (2014)

A STUDY OF THE OPTIMUM PARAMETERS IN EDM MACHINING OF TUNGSTEN CARBIDE MATERIAL
由: KHIN MOE AYE
出版: (2020)

Near-mirror-finish phenomenon in EDM using powder-mixed dielectric
由: Wong, Y.S., et al.
出版: (2014)

A STUDY ON BURNISHING AND SELF-PILOTING MECHANISM FOR HIGH PRECISION DEEP HOLE DRILLING OF INCONEL 718
由: MALARVIZHI SANKARANARAYANASAMY
出版: (2017)

Design, Development and Study of Optimal Parameters of a Micro Wire Electrical Discharge Machining (WEDM) Device
由: SADIQ MOHAMMAD ALAM
出版: (2010)

Efficacy of glow discharge gas plasma treatment as a surface modification process for three-dimensional poly (D,L-lactide) scaffolds
由: Chim, H., et al.
出版: (2014)

Workpiece vibration aided nano-graphite powder suspended dielectric fluid in micro-electrical discharge machining (μ-EDM) processes
由: Prihandana, G.S., et al.
出版: (2014)

Design and development of an on-machine profile measurement system for an ELID grinding machine
由: MOHAMMAD SAZEDUR RAHMAN
出版: (2011)

Femtosecond laser machining of high permeability permalloy
由: Li, X., et al.
出版: (2014)

Model-based Tool Condition Monitoring for Ball-nose End Milling
由: HUANG SHENG
出版: (2013)

Ultra-precision machining of micro grooves on electroless nickel plated material
由: KHANDAKER MOSTAFA REZAUR RAHMAN
出版: (2010)

Laser cladding of copper-based materials for building electrical discharge machining electrode
由: Tang, Y., et al.
出版: (2014)

An investigation of cutting forces and surface damage in high-speed turning of Inconel 718
由: Pawade, R.S., et al.
出版: (2014)

Accuracy improvement in nanographite powder-suspended dielectric fluid for micro-electrical discharge machining processes
由: Prihandana, G.S., et al.
出版: (2014)

Micro-machinability of nanoparticle-reinforced Mg-based MMCs: an experimental investigation
由: Teng, X, et al.
出版: (2020)

A study on the machining of high-aspect ratio micro-structures using micro-EDM
由: Lim, H.S., et al.
出版: (2014)

DEVELOPMENT OF SMART VIBROPEENING METHOD FOR ADVANCED SURFACE CONDITIONING OF AEROSPACE PARTS
由: ABHAY GOPINATH
出版: (2023)

Wire electrical discharge polishing of additive manufactured metallic components
由: Boban, J., et al.
出版: (2021)

Revealing the WEDM process parameters for the machining of pure and heat-treated titanium (Ti-6Al-4V) alloy
由: Gupta, Nitin Kumar, et al.
出版: (2022)

Forecast combinations in machine learning
由: QIU, Yue, et al.
出版: (2020)

Enhancing solid oxide fuel cells with nanoscale thin film surface modification
由: Muhammad Amir Hakim Bin Effendy
出版: (2024)

Surface modification and antibacterial activity of electrospun polyurethane fibrous membranes with quaternary ammonium moieties
由: Yao, C., et al.
出版: (2014)

Surface texture indicators of tool wear - a machine vision approach
由: Bradley, C., et al.
出版: (2014)

Experimental evaluation on the effect of minimal quantities of lubricant in milling
由: Rahman, M., et al.
出版: (2014)

Femtosecond laser-induced ripple structures on magnesium
由: Guan, Ying Chun, et al.
出版: (2016)

A fractal surface and its measurement by computer simulation
由: Min, S.W., et al.
出版: (2014)

Ball burnishing
由: Loh, Ngiap Hiang, et al.
出版: (2008)

Quality mesh generation for molecular skin surfaces using restricted union of balls
由: Cheng, H.-L., et al.
出版: (2013)

Computer-aided mold design modification for product design change
由: Zhang, L.P., et al.
出版: (2014)

A study on microgrinding of brittle and difficult-to-cut glasses using on-machine fabricated poly crystalline diamond (PCD) tool
由: Perveen, A., et al.
出版: (2014)

Highly hydrophilic and low-protein-fouling polypropylene membrane prepared by surface modification with sulfobetaine-based zwitterionic polymer through a combined surface polymerization method
由: Zhao, Y.-H., et al.
出版: (2014)

First Principles Study on Surface Modification of Antimony Doped Tin Dioxide Nanoparticles
由: MONG YU SIANG
出版: (2013)

Utilizing chemical domain knowledge and machine learning for nanoparticle and biochemical spectroscopic analysis
由: Tan, Emily Xi
出版: (2025)

Surface modification of poly(tetrafluoroethylene) films by double graft copolymerization for adhesion improvement with evaporated copper
由: Wu, S., et al.
出版: (2014)

Surface roughness effect on copper–alumina adhesion
由: Lim, Ju Dy, et al.
出版: (2016)

Wavelet analysis and interpretation of road roughness
由: Liu, W., et al.
出版: (2014)