The development of sequential injection analysis coupled with lab-on-valve for copper determination

• Main Authors: Leelasattarathkul T., Liawruangrath S., Rayanakorn M., Oungpipat W., Liawruangrath B.
• Format: Article
• Language: English
• Published: 2014
• Online Access: http://www.scopus.com/inward/record.url?eid=2-s2.0-33748317812&partnerID=40&md5=860143772a5e109b3dfa4ce948c8c839; http://www.ncbi.nlm.nih.gov/pubmed/18970823; http://cmuir.cmu.ac.th/handle/6653943832/4436
• Institution: Chiang Mai University

A sequential injection analysis (SIA) using lab-on-valve with air segmentation and spectrophotometric detection was designed for copper(II) determination. It is based on the reaction of copper(II) and 2-carboxy-2′-hydroxy-5′-sulfoformazyl benzene (Zincon) in a weak alkaline solution between the air zones. Beer's Law was obeyed over the range of 0.1-2.0 mg L-1 copper(II) with a correlation coefficient 0.9985 and a slope of 0.2893 absorbance unit/mg L-1. The relative standard deviation was 2.0% for a series of 10 measurements of 0.5 mg L-1 copper(II) solution. The detection limit (3 S/N) and the limit of quantification (LOQ) were 0.05 and 0.17 mg L-1 respectively. This method has been successfully applied to determination of copper(II) in wastewater with a sample throughput of 120 h-1. The method is superior to the batchwise method in that it provides fully automation, rapidity, less reagents and sample consumption with little waste generation. © 2006.