Fabrication of sodium potassium niobate ceramics by two step sintering assisted molten salts synthesis
Potassium sodium niobate (KNN) powders were synthesized by a molten salt synthesis. The pure phase KNN was achieved for a calcination temperature of 500 °C which is lower than the conventional technique by 400°C. The KNN ceramics were then fabricated by a two steps sintering technique. Effects of dw...
Saved in:
| Main Authors: | , , , |
|---|---|
| Format: | Journal |
| Published: |
2018
|
| Online Access: | https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=84891762841&origin=inward http://cmuir.cmu.ac.th/jspui/handle/6653943832/48313 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Institution: | Chiang Mai University |
| Summary: | Potassium sodium niobate (KNN) powders were synthesized by a molten salt synthesis. The pure phase KNN was achieved for a calcination temperature of 500 °C which is lower than the conventional technique by 400°C. The KNN ceramics were then fabricated by a two steps sintering technique. Effects of dwell time at T 2 on the properties of the ceramics were investigated. Although there was unchanged in microstructure, the dielectric results indicate that a longer dwell time produced a higher value of peak dielectric constant. However, the 8 h sample exhibited the densest ceramic and showed a better ferroelectric performance. © 2013 Copyright Taylor and Francis Group, LLC. |
|---|