Fabrication and electrical properties of lead zirconate titanate-cement-epoxy composites

In this study, epoxy modified lead zirconate titanate-cement 0-3 and 1-3 composites were fabricated via two different techniques with epoxy added as the third phase. The 0-3 composites were fabricated by the normal paste mixing, while the 1-3 composites were fabricated using a dice-and-fill techniqu...

全面介紹

Saved in:
書目詳細資料
Main Authors: R. Rianyoi, R. Potong, N. Jaitanong, R. Yimnirun, A. Chaipanich
格式: 雜誌
出版: 2018
主題:
在線閱讀:https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=79955696594&origin=inward
http://cmuir.cmu.ac.th/jspui/handle/6653943832/50939
標簽: 添加標簽
沒有標簽, 成為第一個標記此記錄!
機構: Chiang Mai University
實物特徵
總結:In this study, epoxy modified lead zirconate titanate-cement 0-3 and 1-3 composites were fabricated via two different techniques with epoxy added as the third phase. The 0-3 composites were fabricated by the normal paste mixing, while the 1-3 composites were fabricated using a dice-and-fill technique. The dielectric and ferroelectric properties of the composites were examined. The results showed that dielectric constant (εr) at frequency of 1 kHz of 1-3 composites was higher and dielectric loss was lower than those of the 0-3 composite. The ferroelectric hysteresis loops agree with the results showing reduction area in lossy characteristic and the loops become more apparent in 1-3 composites. The use of epoxy results in a lower Pirvalue but a reduction in the lossy appearance of P-E loops is observed.