Ultra-sensitive H<inf>2+</inf>sensors based on flame-spray-made Pd-loaded SnO<inf>2+</inf>sensing films

• المؤلفون الرئيسيون: C. Liewhiran, N. Tamaekong, A. Wisitsoraat, A. Tuantranont, S. Phanichphant
• التنسيق: دورية
• منشور في: 2018
• الموضوعات: Engineering; Materials Science; Physics and Astronomy
• الوصول للمادة أونلاين: https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=84872580479&origin=inward; http://cmuir.cmu.ac.th/jspui/handle/6653943832/52590
• المؤسسة: Chiang Mai University

In this paper, ultra-sensitive hydrogen (H2+) gas sensors based on flame-spray-made Pd-catalyzed SnO2+nanoparticles is presented. Pd-loaded SnO2+crystalline nanoparticles with high specific surface area and well-controlled size were synthesized by flame spray pyrolysis (FSP) in one step. The particle properties were characterized by XRD, BET, SEM, TEM and EDS analyses. The H2+-sensing performances in terms of sensor response, response time and selectivity were optimized by varying Pd concentration between 0.2 and 2 wt%. An optimal Pd concentration for H2+sensing was found to be 0.2 wt%. The optimal sensing film (0.2 wt% Pd/SnO2+, 10μm in thickness) showed an ultra-high sensor response of ∼104to 1 vol% of H2+at 200°C and very short response time within a few seconds. Moreover, the optimum sensing temperature of Pd-loaded SnO2+films was shifted to a lower value compared with that of unloaded SnO2+film. The significant enhancement of H2+sensing performances was attributed to highly effective spillover mechanism of well-dispersed Pd catalyst in SnO2+matrix at low Pd-loading concentration. Furthermore, the catalyst selectivity of Pd toward H2+was found to be significantly higher than those of two other noble metals including Pt and Ru, respectively. Therefore, the flame-made 0.2 wt% Pd/SnO2+sensors is one of the most promising candidates for highly sensitive and selective detection of H2+. © 2012 Elsevier B.V. All rights reserved.